Help me figure out what drop I need

[superdav]

I want a raked drop and I have searched but haven't found the pic of one with that drop and wheel size/backspace to know what it would look like and just buying parts is an expensive guess but I want it to be lower with a rake and the tires in the location pictured. What drop can I do?

I was thinking 2 or 2.5 inch front and 2 inch shackles in the rear

Here is a pic of my truck at stock height with 15x10 wheels, I'm not sure of the backspace but it is deep

[superdav]

forgot to add, I REALLY want 10 inch wheels

[bbbc10]

Jus drop it in the front

[superdav]

Originally Posted by bbbc10

Jus drop it in the front

It's gotta be lower, here's a pic from the side

[bbbc10]

Spindles an 2 inch shackles

[superdav]

Originally Posted by bbbc10

Spindles an 2 inch shackles

I can't find any 2 inch spindles for light duty brakes, 2.5 spindle and 2 shackle?

[Tetanus Express]

If you got to have the 10's in the front. Just do a 2 inch spring and 2 inch shackles in the back.

[bbbc10]

they only have 2.5" spindles for 1" rotors also don't go with a lowering spring go with a spindle

[Tetanus Express]

For alignment purposes the spindles would be the best way to go depending on how good of a front end alignment guy you use. If you use a good guy that is knowledgeable the springs would be the cheaper way. I seen some 3" spindles for sale on the parts board that might be worth looking into. Good luck with your search.