87 R10 with 3/5 drop Can I run 255/70 15 tires? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wpotter · 01-22-2015, 04:55 PM

I have a 87 R10 Custom Deluxe all original with ralley wheels. I want to do an inexpensive drop and not have to cut or modify the truck. I just put new 255 70 15 tires and was going to do a 2/4 drop but the rear scackles will require cutting the bed crossmember so was going to do a 3/5 flip bracket and coil. Has anyone ran this set up? Thanks

badchevy · 01-22-2015, 08:08 PM

I'm running a similar setup with mine. My '87 has a 4/6 drop. It has a flip kit out back and 3" drop spindles with half a coil cut. I also took off the rear bump stop bracket and trimmed the lower control arms to clear the stock rallies. Also, the tires do rub on hard dips. Here is a pic of the truck.

badchevy · 01-22-2015, 08:12 PM

Here are some pics of the rear and front bump stops. I installed these bump stops up front to minimize the tire rubbing.

UKNOWME · 01-23-2015, 12:35 AM

Quote:

Originally Posted by wpotter

I have a 87 R10 Custom Deluxe all original with ralley wheels. I want to do an inexpensive drop and not have to cut or modify the truck. I just put new 255 70 15 tires and was going to do a 2/4 drop but the rear scackles will require cutting the bed crossmember so was going to do a 3/5 flip bracket and coil. Has anyone ran this set up? Thanks

Cutting the bed cross rail is no big deal and does not mess with the structural integrity at all. Although I do think you'll like the 3/5 drop better. I'd suggest to trade the 70s for a pair of 60s up front.

Rich84 · 01-23-2015, 02:17 PM

Name: IMG_1738.jpg
Views: 529
Size: 50.8 KB

255 70's
3" spindles and 1.5" drop springs..No problems at all.

brady01 · 01-23-2017, 08:59 AM

Quote:

Originally Posted by badchevy

I'm running a similar setup with mine. My '87 has a 4/6 drop. It has a flip kit out back and 3" drop spindles with half a coil cut. I also took off the rear bump stop bracket and trimmed the lower control arms to clear the stock rallies. Also, the tires do rub on hard dips. Here is a pic of the truck.

How'd you remove the rear bump stops? Air hammer? Mine are hitting hard lol

badchevy · 01-23-2017, 10:57 PM

I believe I used a sawzall to cut the rivet heads off then used a air punch to knock them out. If not, a cut off tool will do.

01-22-2015, 04:55 PM	#1
wpotter Registered User Join Date: Feb 2009 Location: Adkins Texas Posts: 157	87 R10 with 3/5 drop Can I run 255/70 15 tires? I have a 87 R10 Custom Deluxe all original with ralley wheels. I want to do an inexpensive drop and not have to cut or modify the truck. I just put new 255 70 15 tires and was going to do a 2/4 drop but the rear scackles will require cutting the bed crossmember so was going to do a 3/5 flip bracket and coil. Has anyone ran this set up? Thanks __________________ Never a failure, Always a lesson! 1968 Chevy SWB Fleetside ECE 4/6 327/350 1987 Chevy V20 Scottsdale 4X4 350/400 4.10 1987 Chevy Custom Deluxe SWB 305/7004R4 1991 Suburban Silverado V1500 4X4 350/700R4 2015 Chevy Crew Cab SWB (Daily Driver) 5.3

01-22-2015, 08:08 PM	#2
badchevy Registered User Join Date: May 2010 Location: San Antonio, TX Posts: 102	Re: 87 R10 with 3/5 drop Can I run 255/70 15 tires? I'm running a similar setup with mine. My '87 has a 4/6 drop. It has a flip kit out back and 3" drop spindles with half a coil cut. I also took off the rear bump stop bracket and trimmed the lower control arms to clear the stock rallies. Also, the tires do rub on hard dips. Here is a pic of the truck.

01-22-2015, 08:12 PM	#3
badchevy Registered User Join Date: May 2010 Location: San Antonio, TX Posts: 102	Re: 87 R10 with 3/5 drop Can I run 255/70 15 tires? Here are some pics of the rear and front bump stops. I installed these bump stops up front to minimize the tire rubbing.

01-23-2015, 02:17 PM	#5
Rich84 Registered User Join Date: Mar 2012 Location: Woodbury, Ct. Posts: 1,693	Re: 87 R10 with 3/5 drop Can I run 255/70 15 tires? 255 70's 3" spindles and 1.5" drop springs..No problems at all.

01-23-2017, 10:57 PM	#7
badchevy Registered User Join Date: May 2010 Location: San Antonio, TX Posts: 102	Re: 87 R10 with 3/5 drop Can I run 255/70 15 tires? I believe I used a sawzall to cut the rivet heads off then used a air punch to knock them out. If not, a cut off tool will do.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.