|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-03-2017, 01:09 PM
|
#1 |
|
Registered User
Join Date: Mar 2017
Location: Wichita, Kansas
Posts: 86
|
Best way to clean bed sills and paint?
Hey y'all, the bed sills on my truck aren't terrible, and will be fine if cleaned up and painted. Question is, what's best way to clean them and paint them? Just wire wheel them down and paint em? No problem doing the work with the wire wheel, curious of what type of paint to use that'll hold good? I had Eastwood chassis black and stuff on way, should I just use that? Thanks in advance.
|
|
|
|
04-03-2017, 11:45 PM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Best way to clean bed sills and paint?
The best way is to have them sand blasted and coat them with a good epoxy primer and topcoat.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
04-04-2017, 12:03 AM
|
#3 |
|
Registered User
Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
|
Re: Best way to clean bed sills and paint?
Agreed on the blasting. If that's not feasible, I'd acid etch them after the wire brush, rinse, dry, and prime with good primer.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
