The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-13-2017, 03:51 PM   #1
NorCalAnthony
Registered User
 
Join Date: Jul 2014
Location: Lincoln, CA
Posts: 208
Gen IV DBW Pedal in Square Body?

Does anyone know if the Gen IV DBW pedals will bolt in to the 73-87 square bodies or do they need to something like Hart Rod's bracket for the Gen III DBW pedals in the 67-72 trucks? I think all of the Gen IV's I've seen were plastic so I'm guessing just cutting and welding them is out too.

Sorry if this is a dumb question but I've been looking at a ton of build threads and am only finding Gen III stuff or partially completed builds that haven't gotten to that point for my body style (84 K5). I already picked up a diesel pedal that I was going to use for a Gen III swap but recently picked up an LS2 and am trying to decide if I should just get some adapter harnesses to hook the newer engine up to what I already have or if I should go ahead and start collecting the other Gen IV stuff. Either way I still plan on getting a custom tuned PCM/ECM and harness so those costs are a wash...
NorCalAnthony is offline   Reply With Quote
Old 07-13-2017, 06:45 PM   #2
dayj1
Senior Member
 
Join Date: Jul 2009
Location: Athens, AL
Posts: 499
Re: Gen IV DBW Pedal in Square Body?

It's not a direct bolt in, so you'll need a mounting bracket. The good news about gen 4 pedals is that they're all the same, electrically, with the exception that two pins have to be swapped in the harness to use a car pedal on a factory truck harness. I think it's pin D and E, but double check that with a Google search. The Monte Carlo SS pedal is a good candidate to use in swaps because it looks more "period correct" as it's not all plastic. It has a metal arm, that you can bend, cut, weld if needed. Good luck!
dayj1 is offline   Reply With Quote
Old 07-14-2017, 02:12 AM   #3
Houston Ben
Registered User
 
Houston Ben's Avatar
 
Join Date: May 2013
Location: Houston Texas
Posts: 713
Re: Gen IV DBW Pedal in Square Body?

No, not direct bolt in. I use Hart Rod's mounting bracket with corvette pedal and love it!
__________________
1986 C10, 2011 5.3 w/6L80, 3.42 w/ Detroit TrutTrac
Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=584532
Houston Ben is offline   Reply With Quote
Old 07-19-2017, 11:51 AM   #4
NorCalAnthony
Registered User
 
Join Date: Jul 2014
Location: Lincoln, CA
Posts: 208
Re: Gen IV DBW Pedal in Square Body?

Quote:
Originally Posted by dayj1 View Post
It's not a direct bolt in, so you'll need a mounting bracket. The good news about gen 4 pedals is that they're all the same, electrically, with the exception that two pins have to be swapped in the harness to use a car pedal on a factory truck harness. I think it's pin D and E, but double check that with a Google search. The Monte Carlo SS pedal is a good candidate to use in swaps because it looks more "period correct" as it's not all plastic. It has a metal arm, that you can bend, cut, weld if needed. Good luck!
Thanks for the heads up. I'll keep the Monte Carlo SS pedal in mind if I can't find something else that works. I don't have a welder so I'm trying to find something that will bolt in with a bracket or minimum work.

Quote:
Originally Posted by Houston Ben View Post
No, not direct bolt in. I use Hart Rod's mounting bracket with corvette pedal and love it!
Nice! I'm pretty sure yours was one of the build thread I was going through but didn't see any mention or pictures of the pedal. You wouldn't happen to have any pictures with the bracket installed would you? I went through Hart Rob's threads about the brackets and everything I read said that it might work in the 73-87 trucks but nobody ever chimed in to say if it wound up working or not...
NorCalAnthony is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com