MN 250-292 Intake and Exhaust manifolds restored - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tkeduk8r** · 07-02-2017, 01:05 AM

Have your choice of a pair of intake and exhaust manifolds i prepped to use on my 250 build, but stumbled into a set of Clifford intake and headers and no longer need these.

First is my first/original set that I had a machine shop bake and shot peen for me. Castings are real nice and will work great in a stock application. $30 plus shipping to lower 48.

Second is a set I found that has the larger 2.5" exhaust manifold from a 292 in a medium duty truck. This set I again paid to have baked and shotpeened. I then painted the intake with ceramic high temp paint and the exhaust manifold was coated in Eastwood's high temp cast coating. I also installed new studs and a heat separator gasket. Had this set installed on the finished engine before the Clifford set up kind of fell into my lap. If I had to do it over again, I would have just stayed with this setup and run an adapter for a Rochester 2Jet carb. This set I need $175 plus shipping, but could swap on with zero mods and your up and running.

First Ill take it.

--Mike

**tkeduk8r** · 07-05-2017, 06:08 PM

Ttt... Lowered price!

Husker · 07-06-2017, 08:08 AM

I will take the 2.5" set if shipping is not severe. Zip is 69101. Thanks
Ron

**tkeduk8r** · 07-09-2017, 04:06 PM

Orange and Cast set is sold pending receipt of payment. Thanks Husker!

Lower price on other set 30 plus shipping, to Nebraska it was approximately 30 bucks from here in MN UPS ground...

--Mike

E. Brower · 08-05-2017, 09:37 PM

Is the stock manifold still available ? -- If so what is shipping to Northeast Missouri? -- Thanks -- B.

**tkeduk8r** · 08-06-2017, 02:10 AM

Gonna be about 35 bucks....
Mike

E. Brower · 08-06-2017, 11:01 AM

Sounds good -- I will PM regarding payment -- Thanks -- B.

**FL71C10** · 08-06-2017, 12:37 PM

I'll get in line for the stock one if it gets to me.

**72peace** · 08-08-2017, 01:05 AM

i'll get in line in case either falls through.

Cheers,
Nathan

**tkeduk8r** · 08-08-2017, 09:55 AM

Both Sets are sold.... thanks gentlemen!
Mike

07-02-2017, 01:05 AM	#1
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	250-292 Intake and Exhaust manifolds restored Have your choice of a pair of intake and exhaust manifolds i prepped to use on my 250 build, but stumbled into a set of Clifford intake and headers and no longer need these. First is my first/original set that I had a machine shop bake and shot peen for me. Castings are real nice and will work great in a stock application. $30 plus shipping to lower 48. Second is a set I found that has the larger 2.5" exhaust manifold from a 292 in a medium duty truck. This set I again paid to have baked and shotpeened. I then painted the intake with ceramic high temp paint and the exhaust manifold was coated in Eastwood's high temp cast coating. I also installed new studs and a heat separator gasket. Had this set installed on the finished engine before the Clifford set up kind of fell into my lap. If I had to do it over again, I would have just stayed with this setup and run an adapter for a Rochester 2Jet carb. This set I need $175 plus shipping, but could swap on with zero mods and your up and running. First Ill take it. --Mike Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's Last edited by tkeduk8r; 07-09-2017 at 04:06 PM.

07-05-2017, 06:08 PM	#2
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: 250-292 Intake and Exhaust manifolds restored Ttt... Lowered price! __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

07-06-2017, 08:08 AM	#3
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: 250-292 Intake and Exhaust manifolds restored I will take the 2.5" set if shipping is not severe. Zip is 69101. Thanks Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

07-09-2017, 04:06 PM	#4
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: 250-292 Intake and Exhaust manifolds restored Orange and Cast set is sold pending receipt of payment. Thanks Husker! Lower price on other set 30 plus shipping, to Nebraska it was approximately 30 bucks from here in MN UPS ground... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

08-05-2017, 09:37 PM	#5
E. Brower Registered User Join Date: May 2013 Location: Hannibal, MO Posts: 34	Re: 250-292 Intake and Exhaust manifolds restored Is the stock manifold still available ? -- If so what is shipping to Northeast Missouri? -- Thanks -- B.

08-06-2017, 02:10 AM	#6
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: 250-292 Intake and Exhaust manifolds restored Gonna be about 35 bucks.... Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

08-06-2017, 11:01 AM	#7
E. Brower Registered User Join Date: May 2013 Location: Hannibal, MO Posts: 34	Re: 250-292 Intake and Exhaust manifolds restored Sounds good -- I will PM regarding payment -- Thanks -- B.

08-06-2017, 12:37 PM	#8
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: 250-292 Intake and Exhaust manifolds restored I'll get in line for the stock one if it gets to me. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

08-08-2017, 01:05 AM	#9
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: 250-292 Intake and Exhaust manifolds restored i'll get in line in case either falls through. Cheers, Nathan

08-08-2017, 09:55 AM	#10
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: 250-292 Intake and Exhaust manifolds restored Both Sets are sold.... thanks gentlemen! Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.