|
04-08-2004, 10:34 PM
|
#1 |
|
Registered User
Join Date: Apr 2004
Location: Indy
Posts: 21
|
suspension ?????
Is the front suspension (crossmember ect...) the same from a mid to late 80's van the same as a pick-up? And would it work on my 70 2wd blazer? I can get the whole front end steering box, column, shaft, brakes. You name it, it's all there.Thanks for the info, Ed
|
|
|
|
04-09-2004, 12:18 PM
|
#2 |
|
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
|
i am no expert, but i doubt it. the swaybars dont swap from van to truck, the cross members probably wont either.
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call |
|
|
|
|
04-09-2004, 06:55 PM
|
#3 |
|
Registered User
Join Date: Apr 2004
Location: Indy
Posts: 21
|
How about just the control arms and spindles?
|
|
|
|
|
04-10-2004, 11:11 AM
|
#4 |
|
Registered User
Join Date: Feb 2004
Location: In a snowdrift in Manitoba
Posts: 39
|
I'm going through this right now..
My new disc spindles from an 81 pickup supposedly came off a van in the first place..The upper control arm appears to be the same, but the lower has a few differences..Both have approx 18" centers betwixt the balljoint and pivot shaft, but the newer control arm has different bushings, much bigger rubber ones..The newer a-arms u-bolt right up to the old crossmember, but I'm still suspicious about the geometry , and I'll be checking it carefully when it's on.. The spindles should be fine, but your concern is balljoints..There appears to be larger balljoints on the newer arms, but this should'nt be a problem..Just make sure to get the proper ones to save yourself yet another trip to the parts store.. You'll find tons of info on this board regarding this issue, but I found that you really have to wade right in and start comparing the parts you actually have, as there is all kinds of "armchair" opinions of what fits what..And some of them are wrong.. With a little experimentation, pretty soon you will be one of those folks who actually know
__________________
'70 C-10, mostly rust n' dust '74 BMW R90/6 "The quickest way to get yourself out of a hole, is to stop digging..." |
|
|
|
|
04-18-2004, 03:53 PM
|
#5 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Keep track of the parts you wind up using so you can reference replacements. Or so you can answer my questions if I ever have this prob.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
