70 k/20 14 bolt swap questions and concerns - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jeffahart** · 01-04-2018, 01:18 PM

On my swap from HO52 to SRW corp14 I came up about 1/2" shorter yoke to yoke using zero rates on 1" setback. I made no drive shaft modifications. And definitely, dial in the perches for the pinion angle if you have to weld perches. But just for info sake, a one ton SRW corp14 will bolt directly into the K20 with only shock tab relocation. If you have a line on one of those with the right gears its a quick job.

j

01-04-2018, 01:18 PM	#1
jeffahart Senior Member Join Date: May 2012 Location: Scottsdale, AZ Posts: 1,910	Re: 70 k/20 14 bolt swap questions and concerns On my swap from HO52 to SRW corp14 I came up about 1/2" shorter yoke to yoke using zero rates on 1" setback. I made no drive shaft modifications. And definitely, dial in the perches for the pinion angle if you have to weld perches. But just for info sake, a one ton SRW corp14 will bolt directly into the K20 with only shock tab relocation. If you have a line on one of those with the right gears its a quick job. j __________________ White K20

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.