![]() |
|
![]() |
#1 |
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Calibration
What Clay said. I go a step further. I measure the tank depth, make a simple diagram on paper & check the sweep with the sender out of the tank. I check it wired up to confirm the gauge is reading correctly. I also set the sender to read empty before the tank is empty.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|