aluminum radiators... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zero6-dc · 02-03-2018, 04:20 PM

hello and thank you for your response, I have had this engine since early 2000. I am not aware of any max/min. temperature requirement as yet. That might change as I get deeper into the fine tuning. Until recently the engine has operated on the crate included ecm.
This may all end up as overkill as I feel my way around the Holley HP efi. I am way over my head as I fit the new bits together and begin the tuning phase.

I will check with some of the vendors I see here and see if I can find something that fits.

Thank you again for your attention.

Tony

02-03-2018, 04:20 PM	#20
zero6-dc Registered User Join Date: Jul 2014 Location: lewes de Posts: 12	Re: aluminum radiators... hello and thank you for your response, I have had this engine since early 2000. I am not aware of any max/min. temperature requirement as yet. That might change as I get deeper into the fine tuning. Until recently the engine has operated on the crate included ecm. This may all end up as overkill as I feel my way around the Holley HP efi. I am way over my head as I fit the new bits together and begin the tuning phase. I will check with some of the vendors I see here and see if I can find something that fits. Thank you again for your attention. Tony

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.