bellhousing bolts on a 292 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jack SF · 03-26-2018, 11:47 AM

What is the size and thread pitch on bellhousing bolts for a 64 292 6 cyl?
I forgot to bring a bolt to work to match it. thanks.

**The Rocknrod** · 03-26-2018, 11:54 AM

7/16"-14 Some things are just in my head and I can't get em oooouuuutt.

jack SF · 03-26-2018, 01:52 PM

thank you

**mongocanfly** · 03-26-2018, 04:32 PM

are the bolts bigger on a 292? never got my hands on a 292
every bolt I've ever pulled out of a bellhousing to engine is 3/8-16x1 1/2..except LS...

Nanook · 03-26-2018, 05:51 PM

They are 3/8" x 16....

**The Rocknrod** · 03-26-2018, 06:18 PM

Well, I got on my pants and walked out to the shop and measured - Sure enough 3/8" diameter fasteners. I messed up.

03-26-2018, 11:47 AM	#1
jack SF Registered User Join Date: Dec 2008 Location: san francisco, ca Posts: 33	bellhousing bolts on a 292 What is the size and thread pitch on bellhousing bolts for a 64 292 6 cyl? I forgot to bring a bolt to work to match it. thanks.

03-26-2018, 11:54 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: bellhousing bolts on a 292 7/16"-14 Some things are just in my head and I can't get em oooouuuutt. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-26-2018, 01:52 PM	#3
jack SF Registered User Join Date: Dec 2008 Location: san francisco, ca Posts: 33	Re: bellhousing bolts on a 292 thank you

03-26-2018, 04:32 PM	#4
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,671	Re: bellhousing bolts on a 292 are the bolts bigger on a 292? never got my hands on a 292 every bolt I've ever pulled out of a bellhousing to engine is 3/8-16x1 1/2..except LS... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

03-26-2018, 05:51 PM	#5
Nanook Registered User Join Date: Feb 2016 Location: Georgetown, TX and Bragg Creek, AB Posts: 175	Re: bellhousing bolts on a 292 They are 3/8" x 16....

03-26-2018, 06:18 PM	#6
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: bellhousing bolts on a 292 Well, I got on my pants and walked out to the shop and measured - Sure enough 3/8" diameter fasteners. I messed up. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.