front spring question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

corn · 05-04-2004, 09:43 PM

I cut one coil from my front springs & was told that will lower my truck 2". I dont have an engine in the truck yet & it didnt drop much. Along with the springs I installed 3" bell tech spindles hoping for 5" total drop. Any input here?..corn

corn · 05-04-2004, 10:34 PM

Thanks. Thats what I wanted to hear!...corn

05-04-2004, 09:43 PM	#1
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	front spring question I cut one coil from my front springs & was told that will lower my truck 2". I dont have an engine in the truck yet & it didnt drop much. Along with the springs I installed 3" bell tech spindles hoping for 5" total drop. Any input here?..corn

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-04-2004, 10:34 PM	#2
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Thanks. Thats what I wanted to hear!...corn



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.