Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-12-2018, 05:31 PM | #1 |
Registered User
Join Date: Nov 2014
Location: Yuba City, CA.
Posts: 678
|
Rear shock mounts on 53 S10 swap
Anyone know the proper way to mount rear shocks. /| or\ does it matter in front of rear diff behind or one in front one behind? I'm running an 8.8 with rear anti sway bar and mustang gas tank under the bed. Oh and the control arms. Here pic of what I have. Thanks....
__________________
Jan's 53 |
05-12-2018, 06:41 PM | #3 |
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,670
|
Re: Rear shock mounts on 53 S10 swap
with the rear sway bar its gonna be tuff to squeeze it in there..but I prefer both my shocks behind the axle....that's just me though
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
05-12-2018, 10:29 PM | #4 | |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
|
Re: Rear shock mounts on 53 S10 swap
Quote:
it looks like you have a gas tank behind the axle, so you probably took out the stock shock crossmember to do that. otherwise you could have just run the stock s10 lower and upper shock mounts. you instead will need a lower shock mount that welds to the axle and stocks out behind the axle a bit, and an upper mount directly above it. the stock s10 shock has like 9 inches of travel but you will never need that much unless you plan on hauling gravel (with an underbed gas tank I doubt that is your plan) so instead, go at it backwards, install the upper and lower mounts and go looking for a shock that is a little longer when extended than your distance between mounts. I found the monroe shock website is great for looking up shock dims, the drawback is you might need to know what the shock number is first. start by looking up the 98+ s10 blazer 4x4 FRONT shock, it is eye and eye mount (like what you will probably install) it is shorter than a rear shock, and is heavy duty. good luck!
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
|
05-13-2018, 12:27 AM | #7 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
|
Re: Rear shock mounts on 53 S10 swap
I dont think the s10 lower shock mount will work, it needs to be leaned back more than your gas tank will allow. are the 8.8 mounts one toward front one toward rear? you will need the angles to match or the damping will be different.
I am a conservationist so I would probably cut the s10 lower mount and set it up as an upper for those 8.8 mounts. you can probably order the same thing from a racing/hot rod website.
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|