The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-24-2018, 05:51 PM   #1
z71se
Registered User
 
Join Date: Nov 2015
Location: Cailfornia
Posts: 284
2WD Lowered - Shock Mount Relocation Needed?

I have a 4/6 drop - standard stuff. Spindles, springs, and drop shocks. I'm rebuilding all my suspension and wonder if I should fabricate some shock relocation mounts. I really don't like the flimsy 2-bolt brackets that bolt to the top (flat part) of the frame. I want something much stronger that bolts both to the top of the frame, and the sides. No one makes a bolt-on kit like this, although they do make them for the 67-72 guys. Anyone done something like that this that can post or text me pictures?

__________________
77 C10 Silverado SWB - LS Swap, mechanical resto-mod
05 Z71 Silverado RCSB - 5.3L LM7, 76mm turbo, 4L80e
z71se is offline   Reply With Quote
Old 05-24-2018, 09:04 PM   #2
N2TRUX
Happy to be here
 
N2TRUX's Avatar
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
Re: 2WD Lowered - Shock Mount Relocation Needed?

RideTech makes them. I have installed several sets
__________________
Follow me on Facebook and Instagram @N2trux.com

Articles-

"Jake" the 84 to 74 crewcab

"Elwood" the77_Remix

85 GMC Sierra "Scarlett"

"Refining Sierra"
N2TRUX is offline   Reply With Quote
Old 05-25-2018, 08:37 AM   #3
bluex
Registered User
 
bluex's Avatar
 
Join Date: Jun 2004
Location: Spartanburg, SC
Posts: 1,963
Re: 2WD Lowered - Shock Mount Relocation Needed?

You shouldn't need it. I have stock replacement KYB shocks on my truck and it sits the a-arms 1/4" off the ground when aired out. I had a setup like you have pictured and it was constantly tearing up the washers that go over the bushings. It also wasn't allowing it to go all the way down. It rides a littler better now with the stock setup.
Attached Images
  
bluex is offline   Reply With Quote
Old 05-25-2018, 11:49 AM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: 2WD Lowered - Shock Mount Relocation Needed?

Quote:
Originally Posted by bluex View Post
You shouldn't need it. I have stock replacement KYB shocks on my truck and it sits the a-arms 1/4" off the ground when aired out. I had a setup like you have pictured and it was constantly tearing up the washers that go over the bushings. It also wasn't allowing it to go all the way down. It rides a littler better now with the stock setup.
Not saying you're wrong, but I feel it depends on how much travel (the shocks installed) require. I had to raise the upper shock mount on my 74 to yield the best compression/extension dimensions for the shocks I used.

Not all front shocks for 73-87's have the exact same dimensions. Add in different drop variations (how much spindle drop; how much spring drop) plus each individuals ride quality preference & the statement "you shouldn't need it" is probably a little broad.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 05-25-2018, 12:56 PM   #5
N2TRUX
Happy to be here
 
N2TRUX's Avatar
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
Re: 2WD Lowered - Shock Mount Relocation Needed?

Scoti is being politically correct bluex. I feel that shock extenders should be part of any front suspension drop that includes short springs. If you reduce the shock travel by 1,2, or 3 inches a shorter shock will not offer a better ride. No matter what combo of fluid, gas, or valving a shock uses for damping, it needs travel to be effective. The shorter the travel, the less effective it is.

After trying several shorter or "drop" shocks I discovered that would not improve travel.
Now, I "always" add upper shock mounts in front with longer shocks.
__________________
Follow me on Facebook and Instagram @N2trux.com

Articles-

"Jake" the 84 to 74 crewcab

"Elwood" the77_Remix

85 GMC Sierra "Scarlett"

"Refining Sierra"
N2TRUX is offline   Reply With Quote
Old 05-25-2018, 03:09 PM   #6
StorminNorman
Registered User
 
Join Date: Jul 2017
Location: Victoria BC
Posts: 71
Re: 2WD Lowered - Shock Mount Relocation Needed?

If you're not cutting down the bump stops why wouldn't stock length shocks work fine ?
__________________
81 short step.
StorminNorman is offline   Reply With Quote
Old 05-25-2018, 07:33 PM   #7
Tom
driving is in my blood
 
Tom's Avatar
 
Join Date: Dec 1999
Location: Mesa AZ
Posts: 5,748
Re: 2WD Lowered - Shock Mount Relocation Needed?

My 78 uses 2" springs up from with stock shocks. If I lowered it more i would finally get drop shocks but I wouldn't even think about moving the mount for the shock, oem one works just fine.
__________________
-78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle.
-98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes.
-02 Suburban 4x4: leveled front
-CBR600F4i, CBR600RR, CBR1000RR, and standup skis
DISCLAIMER: I cant spell for the life of me.
Tom is offline   Reply With Quote
Old 05-25-2018, 09:57 PM   #8
bluex
Registered User
 
bluex's Avatar
 
Join Date: Jun 2004
Location: Spartanburg, SC
Posts: 1,963
Re: 2WD Lowered - Shock Mount Relocation Needed?

Quote:
Originally Posted by N2TRUX View Post
Scoti is being politically correct bluex. I feel that shock extenders should be part of any front suspension drop that includes short springs. If you reduce the shock travel by 1,2, or 3 inches a shorter shock will not offer a better ride. No matter what combo of fluid, gas, or valving a shock uses for damping, it needs travel to be effective. The shorter the travel, the less effective it is.

After trying several shorter or "drop" shocks I discovered that would not improve travel.
Now, I "always" add upper shock mounts in front with longer shocks.

I tried to add those brackets that go on the top of the frame. No way they would have worked with a stock length shock for me. I would have gotten about 1" of up travel over my ride height. Stock location and stock replacement style ones worked best for me an give 11" of travel. I couldn't get that with the stud style shocks and I personally felt they were too soft as well.

Everyone has their own preferences. I'd suggest to everyone, break out a tape measure an look up the specs of the shock you want to run and see if it will work before spending money on a relocation bracket.
bluex is offline   Reply With Quote
Old 05-28-2018, 01:30 AM   #9
bdiamond
Registered User
 
Join Date: Sep 2007
Location: Wichita Falls, Texas
Posts: 459
Re: 2WD Lowered - Shock Mount Relocation Needed?

Heres ones I made for mine
https://www.facebook.com/photo.php?f...&theater&ifg=1

They have a tab on top of the frame and a backer plate inside the frame. 6" travel AFCO shocks.
bdiamond is offline   Reply With Quote
Old 05-28-2018, 08:41 AM   #10
blazer2007
Registered User
 
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,022
Re: 2WD Lowered - Shock Mount Relocation Needed?

do you have other pic,I don,t use facebook
blazer2007 is offline   Reply With Quote
Old 05-28-2018, 10:36 PM   #11
bdiamond
Registered User
 
Join Date: Sep 2007
Location: Wichita Falls, Texas
Posts: 459
Re: 2WD Lowered - Shock Mount Relocation Needed?

Quote:
Originally Posted by z71se View Post
Anyone done something like that this that can post or text me pictures?

Can someone post the pictures in the Facebook link I posted? If not, what is a good hosting site? I used to use photobucket...
bdiamond is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com