Over heating problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Jcfcamaro** · 08-26-2018, 01:44 PM

Yes, My original radiator was taken to a shop and was redone. Had a shroud on it also, but would run hot. Everyone said to ditch the solid 4 blade fan and get a clutch fan so I did with no response.Even played around with different thermostats. Ended up buying the ECP radiator and all my problems went away. When I get closer to getting my 72 k10 with A/C I'm buying one for it. I have a factory radiator for it, but it would need sent to the shop to be tested/fixed and I'm not going down that path again and waste money.

08-26-2018, 01:44 PM	#1
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: Over heating problem Yes, My original radiator was taken to a shop and was redone. Had a shroud on it also, but would run hot. Everyone said to ditch the solid 4 blade fan and get a clutch fan so I did with no response.Even played around with different thermostats. Ended up buying the ECP radiator and all my problems went away. When I get closer to getting my 72 k10 with A/C I'm buying one for it. I have a factory radiator for it, but it would need sent to the shop to be tested/fixed and I'm not going down that path again and waste money.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.