Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-27-2018, 03:08 PM | #1 |
Senior Member
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,862
|
What does this Iine do
And where or what do I hook it up to on my 67 c10 ls conversion? It's a 2003 dbw and the line I'm talking about is attached to the housing on top of the engine in front of the manifold with the green tab on it. It runs parralel with the fuel lines. Help is appreciated!!!
__________________
1967custom |
08-27-2018, 03:11 PM | #2 |
Registered User
Join Date: Jul 2016
Location: Brandon,MS
Posts: 489
|
Re: What does this Iine do
That may be the EVAP line. I deleted that on mine.
|
08-27-2018, 03:14 PM | #3 |
Registered User
Join Date: Mar 2012
Location: Woodbury, Ct.
Posts: 1,692
|
Re: What does this Iine do
That's for the evap. You don't need it. You can leave it in the manifold or get or make a block off for it.
|
08-27-2018, 04:30 PM | #4 |
Senior Member
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,862
|
Re: What does this Iine do
cool thanks guys. im gonna cut and plug it then
__________________
1967custom |
08-27-2018, 09:42 PM | #5 |
Registered User
Join Date: Jul 2016
Location: Brandon,MS
Posts: 489
|
Re: What does this Iine do
ICT billet makes a block off kit on amazon. You can get EVAP and EGR block plates together
|
08-28-2018, 08:14 AM | #6 |
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: What does this Iine do
If you're putting the Vortec cover back on, you can just take the line off the solenoid. Its normally closed so as long as it doesn't have power going to it it will be blocked off assuming the solenoid is good of course.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
08-28-2018, 06:50 PM | #7 |
Senior Member
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,862
|
Re: What does this Iine do
can I just cut it off with a razor?
__________________
1967custom |
08-28-2018, 10:05 PM | #8 |
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: What does this Iine do
I suppose you could, but it would be easier to just push the little white tab on the fitting (on the driver's side) and then pull strait up and the line will come off.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|