|
Re: horse-shoe small block engine mounts / oil pan
I had to drop the pan after I put the engine back in because I used the wrong pan seal. I was able to do it easily though. My truck is a 63, so I'm not sure if there is much difference between the cross members.
I did not remove the starter. All I had to do was drop the exhaust and rotate the engine to where the counterweight of the crank was up in the block at the front of the engine
__________________
Christian Carpenter
1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit
1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed
1995 Dodge Dakota Sport
"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
|
09-08-2018, 01:00 PM
Hybrid Mode
