47-55.1 ls mounts for a s10 swap 51 p/u

[b-mac]

Not positive here, but if the 6.0 has the same mounting points on the block as the 5.3 and 5.7, I would say most have made their own.

There is a kit out there to use the existing V6 mounts, that have a sort of slide mechanism, since you're engine needs to come back toward the firewall quite a bit.

Here's a decent, but sort of blurry shot of where my custom engine mounts landed for my 5.3. I'm recessed into the firewall about an inch.





I used this kit:

https://www.summitracing.com/parts/t...hoClkoQAvD_BwE