|
12-10-2018, 02:20 PM
|
#2 |
|
Registered User
Join Date: Feb 2009
Location: Southern Oregon
Posts: 1,352
|
Re: 1994 G20 Van spindles
I dont know about the spindles.
However, I would yank out the trans. Its most likly a 4l80E being as the donor is a 3/4 ton. A 4L60E would also be worth grabbing. Id also keep the motor if its a 350. It should be a factory roller cam motor. At the very least grab the serpentine set up and all brackets. FYI 4.3 accessory drive is the same as the 5.7 IIRC.
__________________
1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843 |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode