Fruits of my labor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ghost's68 · 01-04-2019, 10:37 PM

So after almost a year since ripping out my old 5.3 swap and dropping in my LS3, I can call the swap done. I still have a few odds and ends I want to clean up but I am fully able to drive this thing around. Super happy with how it’s turned out.

Took it a local shop to tune it and happy with my numbers 487/445torque. More then plenty of power to roast the tires.

I’m at a cross roads now with decidng what to do next with it... LSA or single 76/75 turbski.

Let me know what you guys think.

https://youtu.be/wIdKAqi211s

**mongocanfly** · 01-04-2019, 10:53 PM

love the idle video....what cam did you use?

Ghost's68 · 01-04-2019, 11:06 PM

Quote:

Originally Posted by mongocanfly

love the idle video....what cam did you use?

Thanks Mongo! Went with a custom spec’ed cam by Pat G, ground up by Texas Speed. 231/240 .629"/.615" 111LSA +3

**mongocanfly** · 01-05-2019, 12:17 AM

Is that a stock LS3? with cam

Ghost's68 · 01-05-2019, 12:42 AM

Quote:

Originally Posted by mongocanfly

Is that a stkock LS3? with cam

Stock bottom end and valve train, with just about every bolt on. Ported heads, ported fast102 manifold, 102TB, LT’s to 3” exhaust.

**Hidesertchevy** · 01-05-2019, 01:18 AM

That sounds great!

homemade87 · 01-05-2019, 08:51 AM

That thing its a little monster as is . I would leave it alone and drive the whammy out of it . Once you get past a certain power level on the street especially with street tires it takes some of the fun out of it . What you have will be a blast to drive and be able to handle it on the street safely .

But on the other hand if its a want thing I would go for it . I have had a lot of want things over the years .

My 82 is close to your set up but I have a ls2 bottom with all the goodies . I am around the 450 rwhp . I am in the process of building an iron ls3 out of some parts I have accumulated over time and plan to swap it in place for the ls2 short block . Even with the ls2 block theres not many trucks that can keep up with it . Those turbo trucks are just turning there wheels over . I just hope mine is some what close to your numbers . I would be happy .

Get your self a set of M&H racemaster tires . You will be glad you did . And drive it for a while .

Congrats on the setup . It will be fun . That torque curve is impressive

01-04-2019, 10:37 PM	#1
Ghost's68 Registered User Join Date: Jun 2016 Location: American Canyon, CA Posts: 253	Fruits of my labor So after almost a year since ripping out my old 5.3 swap and dropping in my LS3, I can call the swap done. I still have a few odds and ends I want to clean up but I am fully able to drive this thing around. Super happy with how it’s turned out. Took it a local shop to tune it and happy with my numbers 487/445torque. More then plenty of power to roast the tires. I’m at a cross roads now with decidng what to do next with it... LSA or single 76/75 turbski. Let me know what you guys think. https://youtu.be/wIdKAqi211s

01-04-2019, 10:53 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,671	Re: Fruits of my labor love the idle video....what cam did you use? __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

01-05-2019, 12:17 AM	#4
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,671	Re: Fruits of my labor Is that a stock LS3? with cam __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

01-05-2019, 01:18 AM	#6
Hidesertchevy Senior Member Join Date: Mar 2017 Location: yucca valley Posts: 271	Re: Fruits of my labor That sounds great!

01-05-2019, 08:51 AM	#7
homemade87 Registered User Join Date: Apr 2010 Location: Guntersville Alabama Posts: 1,073	Re: Fruits of my labor That thing its a little monster as is . I would leave it alone and drive the whammy out of it . Once you get past a certain power level on the street especially with street tires it takes some of the fun out of it . What you have will be a blast to drive and be able to handle it on the street safely . But on the other hand if its a want thing I would go for it . I have had a lot of want things over the years . My 82 is close to your set up but I have a ls2 bottom with all the goodies . I am around the 450 rwhp . I am in the process of building an iron ls3 out of some parts I have accumulated over time and plan to swap it in place for the ls2 short block . Even with the ls2 block theres not many trucks that can keep up with it . Those turbo trucks are just turning there wheels over . I just hope mine is some what close to your numbers . I would be happy . Get your self a set of M&H racemaster tires . You will be glad you did . And drive it for a while . Congrats on the setup . It will be fun . That torque curve is impressive Last edited by homemade87; 01-06-2019 at 07:42 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.