![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#51 |
Registered User
Join Date: Dec 2011
Location: Yuma Arizona
Posts: 1,525
|
Re: Just got an NV4500, can't find the oil
Where did you find the oil? Did it come with the kit from AA?
|
![]() |
![]() |
![]() |
#52 |
Registered User
Join Date: Apr 2015
Location: Wichita Kansas
Posts: 455
|
Re: Just got an NV4500, can't find the oil
I got it from Summit, 21.99 qt
__________________
My 57 GMC build |
![]() |
![]() |
![]() |
#53 | |
Registered User
Join Date: May 2017
Location: Central city
Posts: 76
|
Re: Just got an NV4500, can't find the oil
Quote:
By the time I smelled the oil leak - I lost enough trans fluid to burn both main brgs & burn 3rd gear... I bought a 2 ft piece of B-7 boiler allthread for the studs and grade 8 lock washers and nuts and haven't had any problems since. FtP
__________________
76' GMC K25 Sierra Classic Camper Special: propane powered 350ci/NV4500/205/D44/SRW 14B/4:10/tach,tilt,a/c - daily driver 77' GMC K35 Sierra Grande C/C: 350ci/SM465/205/D60/narrow 14B DRW/4:10 Flatbed 82' Chevrolet K30 C/C: 454ci/SM465/205/D60 Detroit locked/narrow 14B DRW/4:56 Flatbed, 6"Rancho, Alcoa's Last edited by Feel the 'Pane; 01-07-2019 at 10:16 PM. |
|
![]() |
![]() |
![]() |
#54 | |
Registered User
Join Date: Apr 2015
Location: Wichita Kansas
Posts: 455
|
Re: Just got an NV4500, can't find the oil
Quote:
__________________
My 57 GMC build |
|
![]() |
![]() |
![]() |
#55 |
Registered User
Join Date: May 2017
Location: Central city
Posts: 76
|
Re: Just got an NV4500, can't find the oil
Yep, I made the same tool & used loctite as well but the cap screws still came loose. I don't abuse my truck but still had the problem hence my post.
I guess the person packing up my kit wasn't paying attention as the kit came with extra metric & not enough SAE fasteners. FtP
__________________
76' GMC K25 Sierra Classic Camper Special: propane powered 350ci/NV4500/205/D44/SRW 14B/4:10/tach,tilt,a/c - daily driver 77' GMC K35 Sierra Grande C/C: 350ci/SM465/205/D60/narrow 14B DRW/4:10 Flatbed 82' Chevrolet K30 C/C: 454ci/SM465/205/D60 Detroit locked/narrow 14B DRW/4:56 Flatbed, 6"Rancho, Alcoa's |
![]() |
![]() |
![]() |
#56 |
Registered User
Join Date: Apr 2015
Location: Wichita Kansas
Posts: 455
|
Re: Just got an NV4500, can't find the oil
I'll keep an eye on them and see if they stay tight. There was 8 metric bolts for the tall housing, 8 SAE for the figure 8 to round transfer case adapter, and 6 SAE for mounting the adapter to the tail housing. I opened everything when it came, and the parts list matched everything I received, but the instructions jumped around in the steps and left out several items, but I already knew how everything was supposed to get installed. I mainly just made sure that I had all the parts that it was supposed to have in the kit.
__________________
My 57 GMC build |
![]() |
![]() |
![]() |
#57 |
Registered User
Join Date: May 2017
Location: Central city
Posts: 76
|
Re: Just got an NV4500, can't find the oil
Back in 2014 when I got my kit, it came with 8 bolts for the T-case plate and the rest were metric & 2 did. lengths. I didn't get upset until I found out the seal was the wrong size. Throw in the weak t-case shifter bracket....
FtP
__________________
76' GMC K25 Sierra Classic Camper Special: propane powered 350ci/NV4500/205/D44/SRW 14B/4:10/tach,tilt,a/c - daily driver 77' GMC K35 Sierra Grande C/C: 350ci/SM465/205/D60/narrow 14B DRW/4:10 Flatbed 82' Chevrolet K30 C/C: 454ci/SM465/205/D60 Detroit locked/narrow 14B DRW/4:56 Flatbed, 6"Rancho, Alcoa's |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|