LS Machine Shop in Los Angeles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72GreenMonster · 03-25-2019, 06:09 PM

So my junkyard 5.3 assembly is pretty tired.

Was trying not to do a rebuild but since the can of worms has been opened.
Does anyone have a solid recommendation:

I would drop off my long block and pick it up to resume my swapping activities.
Any help is appreciated.

I priced reman. blocks for about $1300-1500.

How much to do this through a reputable machine shop and wait for it to be done??

Thanks again,

**First c10** · 03-25-2019, 06:21 PM

670$ summit racing 4.8/5.3 block check it out!!!

https://www.summitracing.com/parts/sum-150157/overview/

03-25-2019, 06:09 PM	#1
72GreenMonster Registered User Join Date: Dec 2018 Location: Los Angeles Posts: 53	LS Machine Shop in Los Angeles So my junkyard 5.3 assembly is pretty tired. Was trying not to do a rebuild but since the can of worms has been opened. Does anyone have a solid recommendation: I would drop off my long block and pick it up to resume my swapping activities. Any help is appreciated. I priced reman. blocks for about $1300-1500. How much to do this through a reputable machine shop and wait for it to be done?? Thanks again, __________________ 72 GMC Sierra 2500

03-25-2019, 06:21 PM	#2
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: LS Machine Shop in Los Angeles 670$ summit racing 4.8/5.3 block check it out!!! https://www.summitracing.com/parts/sum-150157/overview/ __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.