|
05-16-2019, 02:08 PM
|
#1 |
|
Registered User
Join Date: Apr 2013
Location: North pickens SC
Posts: 294
|
Starter bolt
Does anyone what size bolts go in this starter
|
|
|
|
05-16-2019, 02:09 PM
|
#2 |
|
Registered User
Join Date: Jun 2012
Location: Clearwater Beach Florida
Posts: 873
|
Re: Starter bolt
Not sure what size but I got the proper one in the help section at a autozone or advance auto.
|
|
|
|
|
05-16-2019, 02:10 PM
|
#3 |
|
Registered User
Join Date: Apr 2013
Location: North pickens SC
Posts: 294
|
Re: Starter bolt
Been there got two set didnt work to long are short
|
|
|
|
|
05-16-2019, 03:08 PM
|
#4 |
|
Registered User
Join Date: Jun 2016
Location: West Palm Beach, Florida
Posts: 295
|
Re: Starter bolt
I believe they are 3/8-16 bolts. the standard size for the long bolt is approx 4 5/8 long and the short is 1 7/8 long. I think there may have been a 3 5/8 bolt on some starters. you can probably find these at your local Parts House typically in the "Help" section.
Have you measured the height of the Starter Mount? |
|
|
|
|
05-16-2019, 03:11 PM
|
#5 |
|
Registered User
Join Date: Apr 2013
Location: North pickens SC
Posts: 294
|
Re: Starter bolt
Thanks headed back to part store
|
|
|
|
|
05-16-2019, 06:35 PM
|
#6 |
|
Moderator
 
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,205
|
Re: Starter bolt
Starter bolts are special bolts with knurled raised areas just above the threded sections to align the starter correctly.....
See : https://www.jegs.com/i/Dorman-Produc...45640/10002/-1 Also make sure the support strap is in place on other end of starter See" https://www.jegs.com/i/RESTOPARTS/759/CH26413/10002/-1 
__________________
Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox 
|
|
|
|
|
05-16-2019, 06:37 PM
|
#7 |
|
Registered User
Join Date: Apr 2013
Location: North pickens SC
Posts: 294
|
Re: Starter bolt
The 45640 are not the bolt to short and to long
|
|
|
|
|
05-16-2019, 06:42 PM
|
#8 |
|
Moderator
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,205
|
Re: Starter bolt
Post a pic of the starter pls....I m assuming you have the standard Chevy type....
the bolts may appear too long but the serrations need to go into the engine block and then the threads ..... the serrations should be level with the starter body ...post pic of starter with bolts inserted and showing thru block side mount area....
__________________
Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox
Last edited by AussieinNC; 05-16-2019 at 06:51 PM. |
|
|
|
|
05-16-2019, 06:50 PM
|
#9 |
|
Registered User
Join Date: Jul 2008
Location: Eastern Oregon
Posts: 2,406
|
Re: Starter bolt
When I switched to a mini gear reduction style it came with the proper bolts, dropped right in with no issues at all. Sounds terrible but spins the 350 over like no buddy’s business.
__________________
71 C-20 07 Magnum RT AWD |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
