|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
06-13-2019, 08:11 PM
|
#1 |
|
Registered User
Join Date: Dec 2017
Location: Elkhart, Texas
Posts: 1,882
|
Re: Wiper Motor/Blades Trouble
Sounds to me like you don't have the wiper arms "clocked" correctly on the shafts.. Remove both arms from the shafts and run the motor through 3 - 4 wipe cycles and then turn the switch off.. The motor should stop in the parked position.. Install the arms with the blades in the proper parked position, which is about 1 1/2 to 2 inches above the bottom of the windshield..
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
