CA 1964 c10 292 clutch linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Mike_The_Grad** · 06-14-2019, 05:28 PM

I am looking for new clutch linkage components. Z-bar, ball studs(engine side, frame side, bellhousing.) I have the rods already, need the swivel though. Plus clips/retainers, felt washers. I have the fork already too.
Any help with all or part or even just pointed to the right source for this stuff would be greatly appreciated.

**SmirchIs#1** · 07-14-2019, 09:49 AM

Quote:

Originally Posted by Mike_The_Grad

I am looking for new clutch linkage components. Z-bar, ball studs(engine side, frame side, bellhousing.) I have the rods already, need the swivel though. Plus clips/retainers, felt washers. I have the fork already too.
Any help with all or part or even just pointed to the right source for this stuff would be greatly appreciated.

I have a friend that just converted a 69' 292cu.in. 4X4 truck to a 350.I'll bet at least some of the parts could be the same?No?

**Mike_The_Grad** · 07-19-2019, 01:52 AM

I ended up going through a vendor for the parts I needed. Turns out I needed less than I thought. Thanks for the reply though.

07-19-2019, 01:52 AM	#3
Mike_The_Grad Senior Member Join Date: Oct 2013 Location: Santa Paula, CA Posts: 630	Re: 1964 c10 292 clutch linkage I ended up going through a vendor for the parts I needed. Turns out I needed less than I thought. Thanks for the reply though. __________________ 1972 C/10 LWB - Mine 1964 C/10 LWB - My Dad's Instagram: Mike_The_Grad

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-14-2019, 05:28 PM	#1
Mike_The_Grad Senior Member Join Date: Oct 2013 Location: Santa Paula, CA Posts: 630	1964 c10 292 clutch linkage I am looking for new clutch linkage components. Z-bar, ball studs(engine side, frame side, bellhousing.) I have the rods already, need the swivel though. Plus clips/retainers, felt washers. I have the fork already too. Any help with all or part or even just pointed to the right source for this stuff would be greatly appreciated. __________________ 1972 C/10 LWB - Mine 1964 C/10 LWB - My Dad's Instagram: Mike_The_Grad



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.