Door gap question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**HO455** · 08-12-2019, 03:41 PM

This thread has good information that may help. The door striker is adjusted front to back ( on the truck) with shims (lines point to them in photo)
I hope this helps.

http://67-72chevytrucks.com/vboard/forumdisplay.php?f=3

Peanut74 · 08-12-2019, 04:37 PM

I broke down the hinges and replaced the bushings and pins. Glad I did as the bushing that were in there were worn out plastic. So the hinges no longer have any play in them.

I thought about removing the striker to get my door gap but thought that it would create an issue later on.

Peanut74 · 08-12-2019, 04:44 PM

HO455 your link doesn't work. I pretty sure half of it is missing.

**HO455** · 08-12-2019, 05:25 PM

Sorry about the bad link.
Try these.

http://67-72chevytrucks.com/vboard/s...ad.php?t=29970

http://67-72chevytrucks.com/vboard/s...d.php?t=680781

Peanut74 · 08-12-2019, 10:27 PM

Thanks HO455 those links worked. Lots of good information there. Looks like the issue is that the latch plate is sticking out to far. Tomorrow I try removing all the shims and see how much that helps the rear gap.

08-12-2019, 03:41 PM	#1
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,613	Re: Door gap question This thread has good information that may help. The door striker is adjusted front to back ( on the truck) with shims (lines point to them in photo) I hope this helps. http://67-72chevytrucks.com/vboard/forumdisplay.php?f=3 Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

08-12-2019, 04:37 PM	#2
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: Door gap question I broke down the hinges and replaced the bushings and pins. Glad I did as the bushing that were in there were worn out plastic. So the hinges no longer have any play in them. I thought about removing the striker to get my door gap but thought that it would create an issue later on.

08-12-2019, 04:44 PM	#3
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: Door gap question HO455 your link doesn't work. I pretty sure half of it is missing.

08-12-2019, 05:25 PM	#4
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,613	Re: Door gap question Sorry about the bad link. Try these. http://67-72chevytrucks.com/vboard/s...ad.php?t=29970 http://67-72chevytrucks.com/vboard/s...d.php?t=680781 __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

08-12-2019, 10:27 PM	#5
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: Door gap question Thanks HO455 those links worked. Lots of good information there. Looks like the issue is that the latch plate is sticking out to far. Tomorrow I try removing all the shims and see how much that helps the rear gap.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.