Hi All just getting started here - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jorg · 11-25-2019, 08:22 PM

I have rebuilt a 1965 Gmc flleetside lots of modifications front end is the complete bunk from 1976 chev PU used the 350(305 heads light cam) and rear end too. took out the turbo 350 and put in a 400 with a DNE2 overdrive which I'm getting used to. really great on the hwy, engine only revving 1400 at 65 mph. I was wondering if anyone has had any experience with a DNE2 overdrive just how tough is this thing?

wixthedog · 11-26-2019, 03:56 AM

Welcome! I like the color.

11-25-2019, 08:22 PM	#1
Jorg Registered User Join Date: Jun 2019 Location: Fitzroy Harbour Ontario Posts: 1	Hi All just getting started here I have rebuilt a 1965 Gmc flleetside lots of modifications front end is the complete bunk from 1976 chev PU used the 350(305 heads light cam) and rear end too. took out the turbo 350 and put in a 400 with a DNE2 overdrive which I'm getting used to. really great on the hwy, engine only revving 1400 at 65 mph. I was wondering if anyone has had any experience with a DNE2 overdrive just how tough is this thing? Attached Images

11-26-2019, 03:56 AM	#2
wixthedog Registered User Join Date: Sep 2019 Location: Magnolia, TX Posts: 225	Re: Hi All just getting started here Welcome! I like the color. __________________ Mike 1976 C10 RCLB - 350 - SM465 4 Spd - 4.5"/6" Drop Obligatory Build Thread HERE! 1979 C20 RCLB - 350 - TH350 Auto

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.