|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-02-2002, 09:59 PM
|
#1 |
|
Got 20's????
Join Date: Oct 2001
Location: Aberdeen SD
Posts: 1,451
|
anybody with 85-87 with 700R4
Could you please measure your driveshaft length for me? it also has to be a long box. I need one that is right around 69" for my 72. I think one off these trucks should fit perfect since I have a 700R4 and longbox.
__________________
99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road. |
|
|
|
06-05-2002, 07:18 AM
|
#2 |
|
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
A drive shaft off a LWB truck should work. The frames are basically the same. I have a SWB truck and the drive shaft not adding the yoke for the tranny is 57 inches. Do you have a 12 bolt on your truck? If so the 85-87 1/2 ton trucks have 10 bolt rearends. You will need a bastard U joint to bolt up the drive shaft to the 12 bolt. I just replaced mine with NAPA part number 372 in the yellow box. I replaced my original 10 bolt with a 12 bolt. My truck also has the 700R4 combo.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
