MD rocker boxes & more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 12-08-2019, 05:08 PM

***DISCLAIMER*** these are home made pcs that I acquired that look close but I have no idea if they fit

I already bought the parts I need for my Blazer and happened on these. The rocker boxes are lighter gauge metal ( i am guessing no more than 18 ga) than the aftermarket ones I purchased. I do not know if they will be structural enough or not. I put the passenger side one up under my 72 and it seems to fit in place pretty good. these weight 12# each compared to the tri plus ones I have at 19# each. One other thing I noticed is the lip that bends toward the outer rocker is not a brake bend. Looks like it was hand bent. I am going to see if it will fit in my 10' brake tomorrow and see if I can clean that bend up some but I am not sure if it will fit in there or not.

The other 4 under body parts for the 1/4 seem to be close as well when I compare them to the ones I have sitting here. I do not have anything torn apart enough to see if they actually fit. No holes have been drilled in any of it.

For this reason I am going to sell them pretty reasonable with the understanding they may or may not actually work out of the box. I did not make them so I can't say with any certainty they are 100% correct. You might be getting a deal or you might be getting extra fab work. The choice is up to you.

All six pcs $175 plus shipping

.

**1rippen6** · 12-14-2019, 09:17 PM

Were you able to clean up the edge?

**richard2717** · 12-14-2019, 09:22 PM

Quote:

Originally Posted by 1rippen6

Were you able to clean up the edge?

Dwayne I actually forgot about them. Let me go try one right quick while I am still out here

**1rippen6** · 12-14-2019, 09:22 PM

Lol, ok let me know.

**richard2717** · 12-14-2019, 09:29 PM

With all the bends it just did fit in the brake without interference. I was able to bend it to a 90* just fine.

.

4554bbl · 12-15-2019, 09:22 PM

Hi, Ill take them if Dwayne passes. shipping will be to Bangor, Maine zip 04401, let me know, thanks Chris.

**1rippen6** · 12-15-2019, 09:23 PM

Quote:

Originally Posted by 4554bbl

Hi, Ill take them if Dwayne passes. shipping will be to Bangor, Maine zip 04401, let me know, thanks Chris.

Don't hold the for me.

**richard2717** · 12-15-2019, 09:47 PM

Quote:

Originally Posted by 4554bbl

Hi, Ill take them if Dwayne passes. shipping will be to Bangor, Maine zip 04401, let me know, thanks Chris.

Will get a quote for shipping tomorrow

4554bbl · 12-15-2019, 09:57 PM

Thanks, and can you please bend that other rocker box in your brake?

**richard2717** · 12-17-2019, 03:54 PM

Sold to 4554bbl payment received should ship tomorrow

12-08-2019, 05:08 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	rocker boxes & more *DISCLAIMER* these are home made pcs that I acquired that look close but I have no idea if they fit I already bought the parts I need for my Blazer and happened on these. The rocker boxes are lighter gauge metal ( i am guessing no more than 18 ga) than the aftermarket ones I purchased. I do not know if they will be structural enough or not. I put the passenger side one up under my 72 and it seems to fit in place pretty good. these weight 12# each compared to the tri plus ones I have at 19# each. One other thing I noticed is the lip that bends toward the outer rocker is not a brake bend. Looks like it was hand bent. I am going to see if it will fit in my 10' brake tomorrow and see if I can clean that bend up some but I am not sure if it will fit in there or not. The other 4 under body parts for the 1/4 seem to be close as well when I compare them to the ones I have sitting here. I do not have anything torn apart enough to see if they actually fit. No holes have been drilled in any of it. For this reason I am going to sell them pretty reasonable with the understanding they may or may not actually work out of the box. I did not make them so I can't say with any certainty they are 100% correct. You might be getting a deal or you might be getting extra fab work. The choice is up to you. All six pcs $175 plus shipping . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-14-2019, 09:17 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rocker boxes & more Were you able to clean up the edge?

12-14-2019, 09:22 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rocker boxes & more Lol, ok let me know.

12-14-2019, 09:29 PM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	Re: rocker boxes & more With all the bends it just did fit in the brake without interference. I was able to bend it to a 90* just fine. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-15-2019, 09:22 PM	#6
4554bbl Registered User Join Date: Oct 2016 Location: bangor maine Posts: 37	Re: rocker boxes & more Hi, Ill take them if Dwayne passes. shipping will be to Bangor, Maine zip 04401, let me know, thanks Chris.

12-15-2019, 09:57 PM	#9
4554bbl Registered User Join Date: Oct 2016 Location: bangor maine Posts: 37	Re: rocker boxes & more Thanks, and can you please bend that other rocker box in your brake?

12-17-2019, 03:54 PM	#10
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	Re: rocker boxes & more Sold to 4554bbl payment received should ship tomorrow __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 12-17-2019 at 06:22 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.