Will these wheels fit ??

[kens65fb]

I was thinking of these wheels and tires for my 64 C10
4 inch drop both front & rear
5 lug conversion already done.

Brand:
U.S. Mags Standard U108 Polished Wheels

[Chevy Fleetside]

You should be able to get up to a 10" wide wheel under a fleet side.

[kens65fb]

Originally Posted by Chevy Fleetside

You should be able to get up to a 10" wide wheel under a fleet side.

I don't want to run 10" rims in the rear, if I go with all 8" wheels, I can cross rotate the tires.
Would the these wheels fit my fleet?

[Chevy Fleetside]

I said you can fit up to a 10" tire. 8's will fit. I believe you will need about a 4" back space. I have 8" rims on my truck running a 4" Backspace. They fit with no problems.

[PGSigns]

Before I say yes or no you need to tells us a size for the wheel you plan to use and the tire you want to run. I have run 8" wheels all the way around on my 66 and in the front with the disc brakes some tires will hit the fender. In the back the 255's I have under it now have a wider section width than the last set and they rub on the inner wheel house.
Jimmy

[Chevy Fleetside]

Originally Posted by PGSigns

Before I say yes or no you need to tells us a size for the wheel you plan to use and the tire you want to run. I have run 8" wheels all the way around on my 66 and in the front with the disc brakes some tires will hit the fender. In the back the 255's I have under it now have a wider section width than the last set and they rub on the inner wheel house.
Jimmy

The rear tires on my truck are 275/60/15 and I have 255's up front. I don't have a problem with any rubbing with a 4" drop in the rear.

[kens65fb]

What 20 inch tires would fit best?

[60chevyjim]

this is a good site to find out tire sizes . I use it a lot to compare tire sizes to put bigger tires on my stuff. I like the wheels you want !!

https://tiresize.com/calculator/