Factory tach dash

[LockDoc]

Originally Posted by Ventanakaz

I have a question, I have a 67 C10 with the factory bezel gauge cluster, My two part question is since my factory one will be replaced with a factory setup that will have a tachometer and vacuum gauge, Should I use a tach filter ? (Bought the filter BTW) and will I run into any problems because now the new one doesn't have the factory choke and the wiper switch will be where moved to the where the choke was ?

I would try it without the filter first. You will have to extend the wires for the new wiper switch location as Andy mentioned in his reply above.

LockDoc