Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-05-2020, 07:44 AM | #1 |
Registered User
Join Date: Jan 2020
Location: Cove, Texas
Posts: 23
|
Power Steering Fitting Question...
Did a search, nothing conclusive.
Has anyone had luck converting high pressure side of 80's model steering box fittings to -AN? Want to lose the factory hose/hard line and go straight to -6AN to 18MM o-ring. See link below for fitting. Pretty sure it will work, was just wondering if any of the membership had already done this? The fitting... https://www.jegs.com/i/KRC/612/10123000/10002/-1 Thanks in advance, T, |
03-05-2020, 06:06 PM | #2 |
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,132
|
Re: Power Steering Fitting Question...
I always use -6 line and used a fitting like that. Double check that the two ports are same size on the box. Use the high type Teflon lined -6 line on the pressure side.
|
03-05-2020, 07:35 PM | #3 | |
Registered User
Join Date: Jan 2020
Location: Cove, Texas
Posts: 23
|
Re: Power Steering Fitting Question...
Quote:
Thanks for the help... T, |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|