![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Dec 2019
Location: Santa Clara CA
Posts: 2
|
Help needed for Wilwood disc brake upgrade
Have a 1972 C10 upgrading brakes to Wilwood. Fitting adapter needed from factory hardline to Wilwood flexline. Is there a fitting available for conversion? Thanks!
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2019
Location: Vale,nc
Posts: 174
|
Re: Help needed for Wilwood disc brake upgrade
I have 2 ask so bear with me. Have u tried the wilwood flex line to your hardline yet?
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Oct 2001
Location: Edgerton OH USA
Posts: 633
|
Re: Help needed for Wilwood disc brake upgrade
If your flex line is 3AN I just did a braided hose conversion on my '69 with '72 brakes. Of course you know that the drivers side hard line fitting is 7/16x24 and the passenger side is 3/8x24 thread even though the hard line tubing is the same. I used an Earls 3AN to 7/16 Summit pn EAR-989549ERL on the left side and a Wilwood Summit pn WIL-220-13124 3/8x3AN on the right side. Summit price was $6.64 and $8.26. These both fit the crossmember tabs and the clips fit them too.
Tom
__________________
'69 swb stepside in progress. '59 Corvette lifetime project |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2019
Location: Santa Clara CA
Posts: 2
|
Re: Help needed for Wilwood disc brake upgrade
Thank you for your responses. We haven't started the upgrade yet but wanted to make sure we have everything once we start.
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
adapter, brakes, wilwood |
Thread Tools | |
Display Modes | |
|
|