Muncie 318 Main Shaft Gear Needles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC_Tom · 04-05-2020, 11:50 PM

Hi

I'm currently disassembling my 3 speed Muncie 318. The problem is to remove the needles of the main shaft gear. In front of the first row of needle bearings is a ring. According to the manual, there should be nothing. I don't know how to get the needles out

. The back row fell out easily. Maybe someone can help me.

GMC_Tom · 04-06-2020, 12:29 PM

Problem solved

Someone pressed a further spacer into the end.
Was hard to get out. Maybe it was a trick to improve the transmission?

But now it should work

04-05-2020, 11:50 PM	#1
GMC_Tom Registered User Join Date: Jul 2018 Location: Tirol, Austria Posts: 11	Muncie 318 Main Shaft Gear Needles Hi I'm currently disassembling my 3 speed Muncie 318. The problem is to remove the needles of the main shaft gear. In front of the first row of needle bearings is a ring. According to the manual, there should be nothing. I don't know how to get the needles out . The back row fell out easily. Maybe someone can help me. Attached Images

04-06-2020, 12:29 PM	#2
GMC_Tom Registered User Join Date: Jul 2018 Location: Tirol, Austria Posts: 11	Re: Muncie 318 Main Shaft Gear Needles Problem solved Someone pressed a further spacer into the end. Was hard to get out. Maybe it was a trick to improve the transmission? But now it should work

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.