Looking for a thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Thealien** · 07-04-2020, 07:54 AM

There was someone selling radiator support patch pieces, I can't find it. Can anyone find it?

Thanks
Mark

**Boog** · 07-04-2020, 08:46 AM

I posted these are available from Brother's some time back.
https://www.brotherstrucks.com/67-72...tinfo/RSP72RH/
I bought one some years ago and it was good thickness and finish but I ended up buying a whole new support due to more rust than anticipated and sold my Brother's patch.

You may be remembering a member posted that he had some of these patch panels made. I remember his post and pic but cannot remember his name.

**raggedjim** · 07-04-2020, 09:02 AM

One about Brothers panel http://67-72chevytrucks.com/vboard/s...d.php?t=389406

This guy used a homemade path http://67-72chevytrucks.com/vboard/s...d.php?t=399483

And this guy shows how he made one http://67-72chevytrucks.com/vboard/s...d.php?t=787230

Good luck, Rg

**special-K** · 07-05-2020, 07:14 AM

I have a perfect candidate for this patch. Nice clean support from a friend's clean Cheyenne Super that his dad bought new. Just doggone battery rust from sitting once parked. Mounting areas are perfect. $69 seems like a lot, but compared to the time into making one, I guess is what they priced it by

**Thealien** · 07-05-2020, 08:02 AM

There was a forum member that was making some that looked like the brothers ones? That is the thread I am looking for? Would like to buy from a forum member if at all possible.

Thanks for the replies and links.

**Getter-Done** · 07-05-2020, 09:37 AM

Quote:

Originally Posted by Thealien

There was a forum member that was making some that looked like the brothers ones? That is the thread I am looking for? Would like to buy from a forum member if at all possible.

Thanks for the replies and links.

I remember the one you are talking about.
I think it is member Captinfab.
Here is one link to the piece that connects to it.
You might send him a PM.

Link:http://67-72chevytrucks.com/vboard/s...b+core+support

.

**Thealien** · 07-05-2020, 01:01 PM

Quote:

Originally Posted by Getter-Done

I remember the one you are talking about.
I think it is member Captinfab.
Here is one link to the piece that connects to it.
You might send him a PM.

Link:http://67-72chevytrucks.com/vboard/s...b+core+support

That wasn't it but thanks. This one was the side piece that had a 90 degree bend and the rounded corner? It looked similar to the brothers one a couple posts up but the one I remember was not from brothers?

Someone will remember it, or not.

Thanks

**GJB** · 07-05-2020, 02:04 PM

This it?

http://67-72chevytrucks.com/vboard/s...d.php?t=800612

**Boog** · 07-05-2020, 02:17 PM

That's the one. Atog is online right now.

**Getter-Done** · 07-05-2020, 02:20 PM

Quote:

Originally Posted by GJB

This it?

http://67-72chevytrucks.com/vboard/s...d.php?t=800612

I am glad you found it

I was racking my brain

.

**GJB** · 07-05-2020, 02:26 PM

Glad I could help. I bought a couple of them. Great quality!

**Thealien** · 07-08-2020, 07:55 AM

Thank you, that IS the one I was looking for.

07-04-2020, 07:54 AM	#1
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,138	Looking for a thread There was someone selling radiator support patch pieces, I can't find it. Can anyone find it? Thanks Mark __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

07-04-2020, 08:46 AM	#2
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,661	Re: Looking for a thread I posted these are available from Brother's some time back. https://www.brotherstrucks.com/67-72...tinfo/RSP72RH/ I bought one some years ago and it was good thickness and finish but I ended up buying a whole new support due to more rust than anticipated and sold my Brother's patch. You may be remembering a member posted that he had some of these patch panels made. I remember his post and pic but cannot remember his name. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

07-04-2020, 09:02 AM	#3
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,650	Re: Looking for a thread One about Brothers panel http://67-72chevytrucks.com/vboard/s...d.php?t=389406 This guy used a homemade path http://67-72chevytrucks.com/vboard/s...d.php?t=399483 And this guy shows how he made one http://67-72chevytrucks.com/vboard/s...d.php?t=787230 Good luck, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer - https://67-72chevytrucks.com/vboard/...d.php?t=856475 '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

07-05-2020, 07:14 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Looking for a thread I have a perfect candidate for this patch. Nice clean support from a friend's clean Cheyenne Super that his dad bought new. Just doggone battery rust from sitting once parked. Mounting areas are perfect. $69 seems like a lot, but compared to the time into making one, I guess is what they priced it by __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-05-2020, 08:02 AM	#5
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,138	Re: Looking for a thread There was a forum member that was making some that looked like the brothers ones? That is the thread I am looking for? Would like to buy from a forum member if at all possible. Thanks for the replies and links. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

07-05-2020, 02:04 PM	#8
GJB Senior Member Join Date: Jan 2013 Location: Olympia, Washington Posts: 200	Re: Looking for a thread This it? http://67-72chevytrucks.com/vboard/s...d.php?t=800612

07-05-2020, 02:17 PM	#9
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,661	Re: Looking for a thread That's the one. Atog is online right now. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

07-05-2020, 02:26 PM	#11
GJB Senior Member Join Date: Jan 2013 Location: Olympia, Washington Posts: 200	Re: Looking for a thread Glad I could help. I bought a couple of them. Great quality!

07-08-2020, 07:55 AM	#12
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,138	Re: Looking for a thread Thank you, that IS the one I was looking for. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.