NM WTB Ac air diverter box

[57taskforce]

Like the title says I’m looking for the air diverter box that mounts to the inside ac/heater box. Obviously looking for one with a good functioning mode door or whatever you want to call it.
Whatcha guys got???

[Clatterville trolley]

Originally Posted by 57taskforce

Like the title says I’m looking for the air diverter box that mounts to the inside ac/heater box. Obviously looking for one with a good functioning mode door or whatever you want to call it.
Whatcha guys got???

I have some A/C parts that I have saved from trucks parted out - can you post a photo of what you are on the hunt for or at least a photo with you pointing to the spot where the part is missing. I probably have one, but from description I'm not sure what to look for. Thanks - Jay

[57taskforce]

Here you go. Basically it mounts to the inside ac box and diverts the air between the floor, dash or defrost vents. I don’t need the “S” duct that is screwed to the back lower outlet on the box that feeds the floor vents.

[Clatterville trolley]

Originally Posted by 57taskforce

Here you go. Basically it mounts to the inside ac box and diverts the air between the floor, dash or defrost vents. I don’t need the “S” duct that is screwed to the back lower outlet on the box that feeds the floor vents.

Ok, thanks for the photo that helps a lot! I have a couple of them I'm sure - let me verify that and get back to you yet today, I hope! Jay

[Clatterville trolley]

Originally Posted by Clatterville trolley

Ok, thanks for the photo that helps a lot! I have a couple of them I'm sure - let me verify that and get back to you yet today, I hope! Jay

Ok, here is what I have, door works freely- didn't bother to take of the "S" shaped piece you said you didn't need for the pictures but will before shipping.

Photos:

[Clatterville trolley]

Rest of photos:





Would do $60 shipped to your door. Let me know what you think. Thanks - Jay

[57taskforce]

If there’s no cracks in the base of the door I will take it.

[Clatterville trolley]

Originally Posted by 57taskforce

If there’s no cracks in the base of the door I will take it.

Will give it a good close looking over when I get home tonight and see for sure no cracks and let you know. Jay

[Clatterville trolley]

Originally Posted by Clatterville trolley

Will give it a good close looking over when I get home tonight and see for sure no cracks and let you know. Jay

Finally got home and snapped these pictures for you. I don't see any cracks in or around door - if this is indeed the area you are talking about. If it isn't just let me know and I will make another run at it tomorrow. Jay







My PayPal address is in the bottom of all my posts when you are ready to pull the trigger. Thanks - Jay

[randy500]

Here is the deal on those doors, they are almost always broken internally behind the rubber where the pin and lever operates the door. Hold the door and rotate the lever, it should be tight and not move around if its not broken internally.
They are not repairable.

[Clatterville trolley]

Originally Posted by randy500

Here is the deal on those doors, they are almost always broken internally behind the rubber where the pin and lever operates the door. Hold the door and rotate the lever, it should be tight and not move around if its not broken internally.
They are not repairable.

Ok, I will check it to see and let you know - good to know what to look for thanks! Jay

[57taskforce]

Sounds good let me know how it tests out.

[Clatterville trolley]

Originally Posted by 57taskforce

Sounds good let me know how it tests out.

Tried it this morning and it is good and tight. So, looks to me like we are good to go? Jay

[57taskforce]

I’ll take it. I’ll send PayPal tonight.

[57taskforce]

PayPal sent thanks again!

[57taskforce]

Did you receive the payment?

[Clatterville trolley]

Originally Posted by 57taskforce

Did you receive the payment?

Yes I did get the payment, thought that I sent you something to say so, but obviously I didn't. My apologies for that. I will be boxing it up and sending it tomorrow - Tuesday latest. I will pack it very carefully and get it going. Thanks for your purchase. Jay Self

[57taskforce]

No worries Jay, I just wanted make sure you got it. Thanks again!
Tyler

[Clatterville trolley]

Originally Posted by 57taskforce

No worries Jay, I just wanted make sure you got it. Thanks again!
Tyler

Tyler - finally got your part boxed and ready to send - but now a holiday! This week has been a mess. I have been down in my back really bad and barely have been able to move around, finally feeling a bit better with heat and applications of a product like icy-hot? Computer went kaputski and had to get another one - then get it all sorted out to use again.

Oh well, I am an old friend of Murphy unfortunately. He shows up a lot lately it seems.

Package will go out on Monday or Tuesday - which ever day the USPS starts back up delivering. Jay

[57taskforce]

No worries Jay, I totally understand how life is sometimes. I hope you get feeling better. Health is more important than truck parts.

[Clatterville trolley]

Diverter went out today - USPS, here is tracking number:

9505 5117 9006 0189 5420 05

[57taskforce]

Very good, thank you sir!