Rear bumper for C20 question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Asshat · 07-23-2020, 11:18 PM

I have this heavy bumper on my 63 C20, and I want to get a standard chrome bumper for it. One of those from Brothers or The Truck Shop. But I am wondering if it will just bolt up. It almost looks like someone cut some sheet metal out to fit this one in.

Does anyone have a standard bumper, not the heavy step-type? Maybe some pics?

Thanks!

**cwcarpenter98** · 07-24-2020, 08:52 AM

Your bed hasn't been cut. You'll need the bumper, bumper brackets, license plate bracket, and bolts for it all. Might be able to reuse the bracket to frame bolts if they are the same size

**PGSigns** · 07-24-2020, 08:34 PM

Don't forget the dust shields. I would just put all new bolts in it. You may be able to find most of it in the forsale section.
Jimmy

07-23-2020, 11:18 PM	#1
Asshat Registered User Join Date: Jul 2015 Location: South Orange County CA Posts: 1,265	Rear bumper for C20 question I have this heavy bumper on my 63 C20, and I want to get a standard chrome bumper for it. One of those from Brothers or The Truck Shop. But I am wondering if it will just bolt up. It almost looks like someone cut some sheet metal out to fit this one in. Does anyone have a standard bumper, not the heavy step-type? Maybe some pics? Thanks! Attached Images __________________ 1963 C20, small window, long bed 292, 4-speed Last edited by Asshat; 07-23-2020 at 11:55 PM.

07-24-2020, 08:52 AM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,491	Re: Rear bumper for C20 question Your bed hasn't been cut. You'll need the bumper, bumper brackets, license plate bracket, and bolts for it all. Might be able to reuse the bracket to frame bolts if they are the same size __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

07-24-2020, 08:34 PM	#3
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Rear bumper for C20 question Don't forget the dust shields. I would just put all new bolts in it. You may be able to find most of it in the forsale section. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.