What did you do today not on your truck...

[tutone]

Good job. Those old camaros get in your blood. Parts are available and relatively reasonable.

[67C10Step]

Wife’s Acura developed an annoying rattle somewhere under the hood and I’ve been chasing they sucker for months. Finally found it today. Small aluminum shield in front of the frame crossmember. Held on by M6x1.0 bolts on both ends but one of those stupid plastic push fasteners in the middle. You could see where that middle fastener had gotten loose and the center was vibrating. Put it back with a better fastener and a piece of plastic between the two metal pieces to insulate it a bit.

[special-K]

I talked to my mom yesterday and learned she has a pinched nerve in her back that is giving her a hard time. It hurts worst laying down and she's having a hard time sleeping. BTW, she'll be 93 next month, lives alone. so, no gathering at mom's for Easter. In fact, she didn't want company in case she needed to go get some sleep. She's taking a medicine that makes her groggy and she just wasn't up to socializing. But the friend who is a retired nurse that helps her with such matters was away for Easter.

I went to the store for food, bought a ham for myself and my son, as well as other things to throw together for an Easter dinner. I got the idea to go ahead and grill the ham yesterday evening ahead of time and fix up portions of the rest of today's meal for her. I left early this morning to run it up to her anyway. If she was asleep I'd just leave it for her and head back. well, she got better sleep last night, was up, and I got to visit with her a few hours before heading back to fix the meal for us. Made the most of the situation and we'll have pit ham for a while, then some bean soup!!

[SRU1436]

Replaced the rear brake pads on my daughters CRV.

[Steeveedee]

Supposed to be rotisserie grilled boneless leg of lamb, but the grill we bought doesn't have a provision for the spit. I grilled it, but got busy on the internet and when I went out to check on it, the temp was close to 600º. Got that straightened out with a bit more attention, but lost probably half a pound of meat to char. Not happy. The rest tasted good, though.

Also cleaned out and lubed the track on the sliding glass door to the back yard. All that rain and dirt splashing around clogged the channel.

[Gotenntitans]

Today, I finalized the deal to SELL my 1990 19K mile Sport today….that’s what I did to my truck today.

I don’t drive it much and I’m scared to get it out & get it dirty because I’m afraid of scratching the darn black paint while I’m washing it!

I’ve also had one stolen and I’m kinda paranoid about driving it and leaving it parked outside like at a movie theater, WalMart, or at work. I really enjoy the truck, but it worries me at the same time. The other guy made me a really nice offer and I accepted it today. The truck’s new home will be in Calgary, Alberta, Canada.

My dad is 82 and owns a 2003 Silverado with 50K miles that he’s gonna make a gift of to me. So I’ll still be in the Chevy family.

[special-K]

Originally Posted by Steeveedee

Supposed to be rotisserie grilled boneless leg of lamb, but the grill we bought doesn't have a provision for the spit. I grilled it, but got busy on the internet and when I went out to check on it, the temp was close to 600º. Got that straightened out with a bit more attention, but lost probably half a pound of meat to char. Not happy. The rest tasted good, though.

Also cleaned out and lubed the track on the sliding glass door to the back yard. All that rain and dirt splashing around clogged the channel.

I did my ham on the bigger Weber kettle on hardwood charcoal. Although I kept the fire to one side, the ham had to be close to center for the lid to fit over it. After the first check in only a few minutes, I saw how fast it could char, which was actually just right on the fatty side. It kept me busy rolling it around. Mmmm, that sure was good, though. It was hard driving the 2 1/2 hours back home before I could have my Easter meal. My mom really appreciated it.

Originally Posted by Gotenntitans

Today, I finalized the deal to SELL my 1990 19K mile Sport today….that’s what I did to my truck today.

I don’t drive it much and I’m scared to get it out & get it dirty because I’m afraid of scratching the darn black paint while I’m washing it!

I’ve also had one stolen and I’m kinda paranoid about driving it and leaving it parked outside like at a movie theater, WalMart, or at work. I really enjoy the truck, but it worries me at the same time.

That's me with any nice truck I've had. I wear myself out keeping it spotless, can't leave it anywhere, and on an ultra low mile one every mile worries me about running it up. My divorce forced me into selling things. I had already come to terms with the fact I'm best off with drivers than minty showy trucks, but I still wanted at least one. But selling down was forced upon me, even projects, and I realize it was for the best now. Life for me is no longer about having and all about doing.

[Gotenntitans]

Originally Posted by special-K

That's me with any nice truck I've had. I wear myself out keeping it spotless, can't leave it anywhere, and on an ultra low mile one every mile worries me about running it up. My divorce forced me into selling things. I had already come to terms with the fact I'm best off with drivers than minty showy trucks, but I still wanted at least one. But selling down was forced upon me, even projects, and I realize it was for the best now. Life for me is no longer about having and all about doing.

The guy really made me a nice offer on it. Too good to pass up, actually. My son had a really nice 2010 Silverado 4x4 that got wrecked when he was hit from behind by someone talking on their phone. I may try to get one about that year with under 100K miles on it. I remember driving it a few times and liking it a lot.

I don't like the looks of Dad's '03 Silverado that he's agreed to give to me. I was never crazy about the "Cat Eye" years. Getting it for the right price, though, thanks to Dad. He always took good care of me and still is.

[tutone]

Originally Posted by Gotenntitans

Today, I finalized the deal to SELL my 1990 19K mile Sport today….that’s what I did to my truck today.

I don’t drive it much and I’m scared to get it out & get it dirty because I’m afraid of scratching the darn black paint while I’m washing it!

I’ve also had one stolen and I’m kinda paranoid about driving it and leaving it parked outside like at a movie theater, WalMart, or at work. I really enjoy the truck, but it worries me at the same time. The other guy made me a really nice offer and I accepted it today. The truck’s new home will be in Calgary, Alberta, Canada.

My dad is 82 and owns a 2003 Silverado with 50K miles that he’s gonna make a gift of to me. So I’ll still be in the Chevy family.

Very nice. I looked at a blue one in 92 but it had a v6 and I wanted a 350. Hard to find so I ordered a loaded up 93 Silverado. I wished I had kept it but back then, a truck was a truck.

[Gotenntitans]

Originally Posted by Gotenntitans

Today, I finalized the deal to SELL my 1990 19K mile Sport today….that’s what I did to my truck today.

I don’t drive it much and I’m scared to get it out & get it dirty because I’m afraid of scratching the darn black paint while I’m washing it!

I’ve also had one stolen and I’m kinda paranoid about driving it and leaving it parked outside like at a movie theater, WalMart, or at work. I really enjoy the truck, but it worries me at the same time. The other guy made me a really nice offer and I accepted it today. The truck’s new home will be in Calgary, Alberta, Canada.

Deal fell through yesterday. "Oh Canada" guy called and said when he called to see what it would take to get it across the border, there were too many taxes & fees.

No worries from me, though. I like my truck and I'll just keep it and drive it.

[FleetsidePaul]

Originally Posted by Gotenntitans

Deal fell through yesterday. "Oh Canada" guy called and said when he called to see what it would take to get it across the border, there were too many taxes & fees.

No worries from me, though. I like my truck and I'll just keep it and drive it.

You would think that he would have thought of that beforehand.

But at least you can keep that beautiful truck and have no regrets. I still regret not buying that brand spanking new 1990 454 SS. But my wife said that we needed a family car. So "we' got a new 4 door Saturn! Woo hoo! I think that I just vomited in my mouth. I do that when I think about it.

33 years later and I'm still grumbling over that one.

[tutone]

Originally Posted by Gotenntitans

Deal fell through yesterday. "Oh Canada" guy called and said when he called to see what it would take to get it across the border, there were too many taxes & fees.

No worries from me, though. I like my truck and I'll just keep it and drive it.

Good move. It is money in the bank. No, wait, better yet. That body style is hot and will continue to be.

[Gotenntitans]

Originally Posted by Gotenntitans

Deal fell through yesterday. "Oh Canada" guy called and said when he called to see what it would take to get it across the border, there were too many taxes & fees.

No worries from me, though. I like my truck and I'll just keep it and drive it.

Canada guy called back yesterday and says he sold one of his other vehicles and now he's got all the money he needs to get my truck across the border. I guess the deal is back on.

What did Johnny Depp say when he played John Dillinger.......Bye Bye Blackbird.

[special-K]

I am one who is disappointed GMC didn't go with the cat eyes, since I prefer GMCs. I hated them at first, but grew to like that chiseled look, same as Cadillac has still. I actually prefer nothing newer than GMT400s. 21st century trucks/vehicles don't hold my interest as anything but newer transportation. That's how I felt about the GMT400s, even when I factory ordered my '92. It was just a work tool, but since it cost so much money I wanted it built my way. As trucks changed more and more from that platform I see them as the last classic trucks. It began with the extended cab short bed GMT400s that trucks became more built for people who don't actually need trucks to where they are now, took over the new car market as the family vehicle. I only like traditional cabs

[FleetsidePaul]

I did nothing on my truck today. I tried. I started it and the ole 396 fired right up.

Then it ran out of gas.

No problem. I've got a 2 gallon gas can that's pretty much full in the garage.

Problem. It has a locking gas cap and the key doesn't work.

So I go on Youtube to see how to get this dang thing open. They show guys using a screwdriver and it comes right off. I tried that...Didn't work. It's still on there. (sigh). This thing isn't giving up easy.

[Getter-Done]

Originally Posted by FleetsidePaul

I did nothing on my truck today. I tried. I started it and the ole 396 fired right up.

Then it ran out of gas.

No problem. I've got a 2 gallon gas can that's pretty much full in the garage.

Problem. It has a locking gas cap and the key doesn't work.

So I go on Youtube to see how to get this dang thing open. They show guys using a screwdriver and it comes right off. I tried that...Didn't work. It's still on there. (sigh). This thing isn't giving up easy.

That sucks about the Gas cap
I have never had removed them on a running vehicle.
A non-running Junker you have more choices.
Try U tube this method.

http://youtu.be/8AuiZGcHEo8?t=9

[Boog]

I finished loading up the trailer with old wood from my shop makeover. Had a guy stop by some weeks ago asking for some of the fir siding I was replacing and I said get all you want. He drives by here 4 times a day at least and some how forgot about it. So I swear, less than 1 hour after I finished loading up my trailer he remembered and stopped in again. I told him if he still wanted it to get it cause it won't be here come Saturday. He found a son to help him unload and sort through the sheets and reload the rest. Super! Then I serviced all the lawn care equipment. Weeds are getting tall. It's time.

[FleetsidePaul]

Originally Posted by Boog

Weeds are getting tall. It's time.

Aint it the truth. Mine were a foot high with all the rain. I had to give my yard a haircut before they were 2 feet tall.

My new next door neighbor works with my wife and my wife doesn't like her. She's not friendly. So I parked my meat wagon by her house.

[Boog]

^^^ That's mean.

[LockDoc]

Originally Posted by FleetsidePaul

I did nothing on my truck today. I tried. I started it and the ole 396 fired right up.

Then it ran out of gas.

No problem. I've got a 2 gallon gas can that's pretty much full in the garage.

Problem. It has a locking gas cap and the key doesn't work.

So I go on Youtube to see how to get this dang thing open. They show guys using a screwdriver and it comes right off. I tried that...Didn't work. It's still on there. (sigh). This thing isn't giving up easy.

See if there is a code number stamped into the face of the lock cylinder, right next to the key hole. It would either be numbers, or letters and numbers. If there is, a locksmith may be able to cut a key from the code.

LockDoc

[FleetsidePaul]

Originally Posted by LockDoc

See if there is a code number stamped into the face of the lock cylinder, right next to the key hole. It would either be numbers, or letters and numbers. If there is, a locksmith may be able to cut a key from the code.

LockDoc

There's nothing there. It appears to have had some writing on it at some time but it's totally sun faded.

I have a key that looks like the gas key but it won't go in at all like a key may be broken in there. I couldn't even get an ice pick to go in.

[LockDoc]

Originally Posted by FleetsidePaul

There's nothing there. It appears to have had some writing on it at some time but it's totally sun faded.

I have a key that looks like the gas key but it won't go in at all like a key may be broken in there. I couldn't even get an ice pick to go in.

It would have been stamped into the metal if it was there.

The grooves in your key were probably not compatible with the cap.

LockDoc

[Steeveedee]

Hey Paul, you have a battery-powered drill, right? Or if not, a long extension cord and a 110 volt powered drill? It's not like you're opening a branch of Midnight Auto Supply if you drill the lock out in broad daylight.

[special-K]

I gave up on locking gas caps and lug nuts. Nothing worse than self-inflicted aggravation. It sure sucks locking yourself out of your own gas tank.

[FleetsidePaul]

Originally Posted by special-K

I gave up on locking gas caps and lug nuts. Nothing worse than self-inflicted aggravation. It sure sucks locking yourself out of your own gas tank.

I despise locking gas caps and lugs. Just another key to misplace. My 70 Mustang came with locking lugs and when I took it in for tires the shop called me and asked where the key was? Key? What key? I didn't know that it had them and no key in sight. They got them off with a big socket IIRC. I'll never put them on any vehicle.