|
|
|
10-11-2020, 10:12 AM
|
#1 |
|
Registered User
Join Date: May 2018
Location: Prattville, AL
Posts: 611
|
Re: Por 15
I used POR-15, for the first, on my sandblasted frame just to make sure it didn't rust. I used a brush to spread it on. Since POR-15 breaks down if exposed to UV light I sprayed on some gloss black paint. After all that was done I wanted to run a ground wire to the frame. The only way I could get to clean metal was to use a die grinder with 80 grit.
So that is my experience with POR. If you prep the surface right it works great.
__________________
-------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk" |
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
