Reproduction High Hump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mikecc6 · 10-18-2020, 01:07 PM

I need a high hump cover and firewall piece for 64 c10. The new reproduction pieces show they fit 1960-1962.

Will they fit 1964? They look like they will but I don’t want to buy something that won’t fit.

Thanks

AcampoDave · 10-19-2020, 08:04 PM

Don't know which one you are looking at but Slosh Tubz says they fit 60-66
https://www.sloshtubz.net/store/1960...nels-p78791513

Mikecc6 · 10-19-2020, 08:09 PM

I did look at the Slosh Tubz piece and it does show 60-66.

I was really looking at steel pieces - Key Parts - and they show 60-62. I thought they were the same but don’t want to spend $300 and find out they don’t fit.

AcampoDave · 10-19-2020, 08:31 PM

Maybe you can give them a call. I'm not aware of any changes on the high hump thru the years except the way the gas pedal mounts. 60-62 used bolts and 63-66 had ball studs threaded in the holes but I still dont think that made the threaded mounting bosses any different.

**nsb29** · 10-20-2020, 06:53 AM

I used an original 60 in my 65

bigmoe · 10-20-2020, 04:39 PM

I have a high hump someone gave me but are they two piece? because it doesn't go all the way forward.

Mikecc6 · 10-20-2020, 05:32 PM

There are two pieces. Firewall piece and cover

**The Rocknrod** · 10-30-2020, 03:04 PM

It's weird I havnt seen these for 64-66, I wonder why?
http://autobodyspecialt.com/chevy-pi...for-high-hump/
http://autobodyspecialt.com/1960-196...ll-4wd-models/
http://autobodyspecialt.com/1960-196...ll-4wd-models/

Ennehazrad · 10-30-2020, 04:47 PM

Have you checked LMC? Their high hump firewall piece says it fits 60-66 and costs $90. It’s at the bottom of the page- check it out...

https://www.lmctruck.com/1960-66-che...-filler-panels

https://www.lmctruck.com/1960-66-che...over-high-hump
Posted via Mobile Device

**PGSigns** · 10-31-2020, 08:46 PM

The one key parts sells should fit the 63 to 66. I sold them both pieces a couple of years ago that I had here for my 65. The plan was to clean them up and laser scan the parts to develop the new parts. The difference I think is the 60 to 62 the hump was bolt in and the later ones were spot welded. I would not hesitate to buy the key parts pieces.
Jimmy

Mikecc6 · 11-01-2020, 11:10 AM

Jimmy

Thank you. That’s the information I was looking for. Mike

10-18-2020, 01:07 PM	#1
Mikecc6 Registered User Join Date: Feb 2014 Location: Westminster MD Posts: 73	Reproduction High Hump I need a high hump cover and firewall piece for 64 c10. The new reproduction pieces show they fit 1960-1962. Will they fit 1964? They look like they will but I don’t want to buy something that won’t fit. Thanks

10-19-2020, 08:04 PM	#2
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,778	Re: Reproduction High Hump Don't know which one you are looking at but Slosh Tubz says they fit 60-66 https://www.sloshtubz.net/store/1960...nels-p78791513

10-19-2020, 08:09 PM	#3
Mikecc6 Registered User Join Date: Feb 2014 Location: Westminster MD Posts: 73	Re: Reproduction High Hump I did look at the Slosh Tubz piece and it does show 60-66. I was really looking at steel pieces - Key Parts - and they show 60-62. I thought they were the same but don’t want to spend $300 and find out they don’t fit.

10-19-2020, 08:31 PM	#4
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,778	Re: Reproduction High Hump Maybe you can give them a call. I'm not aware of any changes on the high hump thru the years except the way the gas pedal mounts. 60-62 used bolts and 63-66 had ball studs threaded in the holes but I still dont think that made the threaded mounting bosses any different.

10-20-2020, 06:53 AM	#5
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: Reproduction High Hump I used an original 60 in my 65 __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent

10-20-2020, 04:39 PM	#6
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Re: Reproduction High Hump I have a high hump someone gave me but are they two piece? because it doesn't go all the way forward.

10-20-2020, 05:32 PM	#7
Mikecc6 Registered User Join Date: Feb 2014 Location: Westminster MD Posts: 73	Re: Reproduction High Hump There are two pieces. Firewall piece and cover

10-30-2020, 03:04 PM	#8
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Reproduction High Hump It's weird I havnt seen these for 64-66, I wonder why? http://autobodyspecialt.com/chevy-pi...for-high-hump/ http://autobodyspecialt.com/1960-196...ll-4wd-models/ http://autobodyspecialt.com/1960-196...ll-4wd-models/ __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-30-2020, 04:47 PM	#9
Ennehazrad Registered User Join Date: Apr 2015 Location: Riverside, California Posts: 70	Re: Reproduction High Hump Have you checked LMC? Their high hump firewall piece says it fits 60-66 and costs $90. It’s at the bottom of the page- check it out... https://www.lmctruck.com/1960-66-che...-filler-panels https://www.lmctruck.com/1960-66-che...over-high-hump Posted via Mobile Device

10-31-2020, 08:46 PM	#10
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Reproduction High Hump The one key parts sells should fit the 63 to 66. I sold them both pieces a couple of years ago that I had here for my 65. The plan was to clean them up and laser scan the parts to develop the new parts. The difference I think is the 60 to 62 the hump was bolt in and the later ones were spot welded. I would not hesitate to buy the key parts pieces. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

11-01-2020, 11:10 AM	#11
Mikecc6 Registered User Join Date: Feb 2014 Location: Westminster MD Posts: 73	Re: Reproduction High Hump Jimmy Thank you. That’s the information I was looking for. Mike

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.