|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
02-06-2021, 02:19 AM
|
#1 |
|
Registered User
Join Date: Oct 2009
Location: Denton, Texas
Posts: 1,735
|
Re: Will stud gun and slide hammer pull this out? Please help
I would check for any high spots or "crowns" in the metal first. There likely is one somewhere above the dent. If you find one or more high spots, tap those back down. The metal may go back down to the contour, then you would be left with the dent to contend with.
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
