Mechanical clutch hole in floor for push rod

[pat english]

I put a mechanical pedal assembly in my 88k5.
I was wondering if someone can give me a measurement of where the hole for the pushrod that goes through the floor is located.been searching for hours and calling everyone.but nobody has a mechanical setup.thanks.

[mongocanfly]

There should be a flattened out recess in the floorboard for it...we had this discussion not to long ago here and I added pics...I'll have to search for it..
Here it is...http://67-72chevytrucks.com/vboard/s...ghlight=Clutch

[pat english]

Originally Posted by mongocanfly

There should be a flattened out recess in the floorboard for it...we had this discussion not to long ago here and I added pics...I'll have to search for it..
Here it is...http://67-72chevytrucks.com/vboard/s...ghlight=Clutch

Thanks for the link.

[mongocanfly]

If you need something more specific, I can measure if you need it

[Nick_R_23]

I just covered mine, but these may help you in finding the correct location.

[pat english]

Originally Posted by Nick_R_23

I just covered mine, but these may help you in finding the correct location.

Thanks that does help.thats a bigger hole then I expected.now I dont feel so bad about drilling an extra hole🤪

Got it working.i had to make that bracket that the zbar bolts to.people are asking too much for that little bracket.

[Rickysnickers]

Flipped you pics

[pat english]

Originally Posted by Rickysnickers

Flipped you pics

Nice.Thank you.