'60-'62 Bellhousing Mounts

[Captainfab]

Not having owned a running and driving '60-'62, I'm not sure what is correct here. Does the bellhousing bolt directly onto the metal arch part of the bellhousing mounts? Nothing in between?

[SkinnyG]

From my '61:

[Captainfab]

Those are the mounts I am used to seeing on the '63-'72 trucks and am well aware of how they go together. I guess since this frame I have is a '60-'62 GMC, these must be specific to the GMC's.

[raylube]

My 62 3/4 gmc 2wd mounts are identical to yours in your photo Capt fab

[Captainfab]

I kind of thought it must be a GMC thing. Is your bellhousing bolted directly to the metal part of the mount?

Originally Posted by raylube

My 62 3/4 gmc 2wd mounts are identical to yours in your photo Capt fab

[raylube]

Originally Posted by Captainfab

I kind of thought it must be a GMC thing. Is your bellhousing bolted directly to the metal part of the mount?

I will try and look at it tomorrow for you. My dads 62 chevy c20 with the 235 had the mounts typically found on 63 and later. Photos from the gmc shop manual x6223 show 1/2 and 3/4 like those in your photo

[Captainfab]

Thanks for the pics raylube. So it looks like I thought it should be, the bellhousing directly on the metal part of the mount.

[raylube]

Originally Posted by Captainfab

Thanks for the pics raylube. So it looks like I thought it should be, the bellhousing directly on the metal part of the mount.

Your welcome, sorry for the sideways pictures don't know why they went that way.

[Matt's k5]

You can use later mounts in place of the first design I have on all my GMCs

[gmc684x4]

I want say my 62 k20 chevy is like the first picture steel reinforced rubber isolator with a through bolt from the bottom its buried under 3 feet of snow and with a still busted leg I won't go near it tell it thaws

[slepysal]

mine mounts just mounts to the rubber mounts on the crossmember