Sway bar on a 63 with a later model cross member - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Asshat · 06-02-2021, 09:05 PM

Quote:

Originally Posted by SCOTI

Yes, you did.

You also did not have the frame stands in place. They would space the bar out slightly away from the frame possibly preventing clearance issues.

Wow, I don’t even remember if I took those off the frame I had.
Thank you for bringing that to my attention. There’s a chance I might have these.

**nsb29** · 06-02-2021, 09:10 PM

Going back to your picture I agree with scoti with out frame stands your raising the bar to high get your stands attached to the bar then see where you are

Asshat · 06-02-2021, 09:27 PM

Quote:

Originally Posted by nsb29

Going back to your picture I agree with scoti with out frame stands your raising the bar to high get your stands attached to the bar then see where you are

Yeah, that’s something I forgot to remove from the frame. Oh well.
The Car and Truck Shop has them for $24.

06-02-2021, 09:10 PM	#27
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: Sway bar on a 63 with a later model cross member Going back to your picture I agree with scoti with out frame stands your raising the bar to high get your stands attached to the bar then see where you are __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.