Slopped chop top - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Randy70C-10* · 07-14-2004, 09:08 PM

As much as I'd like to jump on the bandwagon, I'd really like to see that one finished. I always like the "Dare to be Different" approach.

blazerholic · 07-14-2004, 09:18 PM

Have to agree with ya Randy. Might not be done right , but I think it would look quite sick with some 21.5 wide Mickey T's in the bed and a ramjet 502 in the bay! Guess I'm just goofy like that...

*Randy70C-10* · 07-14-2004, 10:17 PM

Sh!t dude, I'd like to see a 502 ramjet in MY truck.

dwaite72lnghrn · 07-14-2004, 10:21 PM

I just wonder if you could turn the intake on a ram jet around to take advantage of the scoop.

jcueckert13 · 07-14-2004, 10:35 PM

the truck dose look a bit cartoonish but it dose have a cool look to it. it would look nice if the front was lowered and the back had some huge drag slicks

FRENCHBLUE72 · 07-15-2004, 12:00 AM

I think it would look good if it was done and updated a little.....

1969 GMC · 07-15-2004, 12:05 AM

Call me crazy, but despite the fact it looks like a leftover from a Mad Max film, I like it.

**N2TRUX** · 07-15-2004, 12:37 AM

This has to be done....

*Shane* · 07-15-2004, 12:50 AM

Stock Sux! Cut 'Em ... it's just an ol' truck!

gonebad2 · 07-15-2004, 01:36 AM

ROFLMAO.....Good thing either of those were never finished. Looks like someone watched that old movie Corvette Summer a few too many times.

72BLAZERDUDE · 07-15-2004, 08:31 AM

And I thought Butchers only cut up meat.

Zumo · 07-15-2004, 08:47 AM

Ouchy.

Smokie55 · 07-15-2004, 10:30 AM

Ditch the frame, add a custom tube chassis and back half that sucker. It would make a cool drag truck. It is definately a slop job, but it could be used as a race truck easily. Since it has been chopped up so bad, it makes a perfect candidate for full on race. Like maybe a Pro-Mod!!

jcueckert13 · 07-15-2004, 10:40 AM

id drive it on the street

**'70_402** · 07-15-2004, 11:07 AM

i like it! not the hood.....one hell of a blind spot on the front passenger side..you couldn't see over the hood. ditch the hood and i would take that project on!

sneakysnake · 07-15-2004, 01:16 PM

Somebodys "baby" at one time another project fallen by the way side.

sactoC10 · 07-15-2004, 02:08 PM

Looks like a full size "Muscle Machine" die-cast! Never seen a chopped top on one of these trucks that I like, yet I have to say this one I do like. The angle forward just works for me... but the ground effects...NO WAY!

I think this thread needs to be a poll.

*Shane* · 07-15-2004, 02:56 PM

oh boy ... saw this truck in person today .... south of Hartselle on Highway 31 ....

A few 72's · 07-15-2004, 03:23 PM

That was the one...

406_SBC · 07-15-2004, 04:38 PM

Personaly think it also looks "toonish", needs a big @ss rat fink stinking outta the roof!

1972_K5 · 07-15-2004, 07:14 PM

LUV2XCLR8-
Yep thats the color...It's been being called "The Green Bean" for a few years now and it just wouldn't be the same if I changed it.

Anyhow it only took 30 years but it looks like that color is making a comeback...ie the new VW Bug and a few other new models that I have seen around. I have a pic of the "before" in my profile. I'd post some pics of the after but its currently in way too many pieces strewn around my garage...Hope to get it back together in August.

fast_dev · 07-15-2004, 10:35 PM

i think its kinda neat, but only for a drag truck, not on the street.

Pont · 07-15-2004, 11:57 PM

I have mixed emotions about that truck but overall, it has (or had) the potential to be a decent truck. At least unique and one of a kind! As far as chopped tops go, I like them on these trucks but it can't be too drastic! I think that truck has gone a bit too far in the chopped department. I also had the same thought regarding Mad Max or the Road Warrior when I saw pics of the front-end.

This truck, on the other hand, has been tastefully chopped at a rake. If I remember correctly, it was something like 2-1/4" up front and 1-3/4" on the rear of the cab. Not sure of the exact chop specs but it was something like that.

crazy longhorn · 07-16-2004, 12:25 AM

"Tastefully chopped"....that is the best way put! i talked with a 1/2 dozen guys on the chop on my longhorn. The best price was on a 8 " chop....around 1200 bones. well,I looked at the truck the dude did(radical, but nice). Told him that the truck was nice....but I was a little on the conservative side. I had to cut it my d@mn self.....3 3/4 at the rear, tipped foward about 1/2". the front pillars were laid back 8-9 degrees......there aint a bit of of fill on the top side of the top .....6 bills later, up to glass front /rear, & about 60 hrs, that squashed top chev was rollin

Still dont have the door glass done.....but she is a rod

crazyL

**guyryan100** · 07-16-2004, 01:32 PM

so that was done on purpose?

07-14-2004, 09:18 PM	#27
blazerholic I am a Gov't Mule Join Date: Aug 2003 Location: Latonia,Ky Posts: 276	Have to agree with ya Randy. Might not be done right , but I think it would look quite sick with some 21.5 wide Mickey T's in the bed and a ramjet 502 in the bay! Guess I'm just goofy like that... __________________ ...to die in the saddle must be my destiny, to ride this rockin' horse I must be crazy...

07-14-2004, 10:21 PM	#29
dwaite72lnghrn Registered User Join Date: Jun 2002 Location: central pa Posts: 1,525	I just wonder if you could turn the intake on a ram jet around to take advantage of the scoop. __________________ 72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne

07-14-2004, 10:35 PM	#30
jcueckert13 Registered User Join Date: Apr 2003 Location: Edgewood New Mexico Posts: 2,088	the truck dose look a bit cartoonish but it dose have a cool look to it. it would look nice if the front was lowered and the back had some huge drag slicks __________________ 1990 subaru legcy (daily driver) 1987 Toyota 4runner (weekend toy) 1968 C30 flatbed dually 1970 C10 longbed stepside (in pieces) 1976 Dodge Dart 1963 Dodge Dart

07-15-2004, 12:05 AM	#32
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	Call me crazy, but despite the fact it looks like a leftover from a Mad Max film, I like it. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

07-15-2004, 12:37 AM	#33
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	This has to be done.... Attached Images

07-14-2004, 09:08 PM	#26
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	As much as I'd like to jump on the bandwagon, I'd really like to see that one finished. I always like the "Dare to be Different" approach.

07-14-2004, 10:17 PM	#28
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Sh!t dude, I'd like to see a 502 ramjet in MY truck.

07-15-2004, 12:00 AM	#31
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I think it would look good if it was done and updated a little.....

07-15-2004, 12:50 AM	#34
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Stock Sux! Cut 'Em ... it's just an ol' truck!

07-15-2004, 01:36 AM	#35
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	ROFLMAO.....Good thing either of those were never finished. Looks like someone watched that old movie Corvette Summer a few too many times. __________________ Your Bought And Sold....I Got Your Soul! Last edited by gonebad2; 07-15-2004 at 01:40 AM.

07-15-2004, 08:31 AM	#36
72BLAZERDUDE Registered User Join Date: Jan 2002 Location: WATAUGA,TX Posts: 675	And I thought Butchers only cut up meat. __________________ 72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA

07-15-2004, 08:47 AM	#37
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Ouchy. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

07-15-2004, 10:30 AM	#38
Smokie55 Registered User Join Date: Oct 2002 Location: Wylie, TX Posts: 141	Ditch the frame, add a custom tube chassis and back half that sucker. It would make a cool drag truck. It is definately a slop job, but it could be used as a race truck easily. Since it has been chopped up so bad, it makes a perfect candidate for full on race. Like maybe a Pro-Mod!! __________________ -- Will Evans -- 1955 Short Step "Sweet Pea" - Family heirloom. 1969 Suburban "Otis" - 396/TH400 - Dallas Ambulance - 1972 K5 blazer "Rusty" - 400/TH350/NP205 - Yeah it's big alright!! - Founding Member of Southern Bowties Club -

07-15-2004, 10:40 AM	#39
jcueckert13 Registered User Join Date: Apr 2003 Location: Edgewood New Mexico Posts: 2,088	id drive it on the street __________________ 1990 subaru legcy (daily driver) 1987 Toyota 4runner (weekend toy) 1968 C30 flatbed dually 1970 C10 longbed stepside (in pieces) 1976 Dodge Dart 1963 Dodge Dart

07-15-2004, 11:07 AM	#40
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	i like it! not the hood.....one hell of a blind spot on the front passenger side..you couldn't see over the hood. ditch the hood and i would take that project on! __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY



Register or Log In To remove these advertisements.

07-15-2004, 01:16 PM	#41
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Somebodys "baby" at one time another project fallen by the way side.

07-15-2004, 02:08 PM	#42
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,055	Looks like a full size "Muscle Machine" die-cast! Never seen a chopped top on one of these trucks that I like, yet I have to say this one I do like. The angle forward just works for me... but the ground effects...NO WAY! I think this thread needs to be a poll. __________________ 5/4 drop LWB wood bed - 15x8 front 235/60 - 15x10 rear 295/50 2003 FORD Escape 1998 Honda VTR1000

07-15-2004, 02:56 PM	#43
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	oh boy ... saw this truck in person today .... south of Hartselle on Highway 31 ....

07-15-2004, 03:23 PM	#44
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 703	That was the one... __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

07-15-2004, 04:38 PM	#45
406_SBC Registered User Join Date: Jun 2004 Location: Kelowna,B.C,Canada Posts: 150	Personaly think it also looks "toonish", needs a big @ss rat fink stinking outta the roof! __________________ " Oh you didn't hear did you. You hear I got a shotgun pulled on my ass? Swear to God."- O'bannion

07-15-2004, 07:14 PM	#46
1972_K5 Registered User Join Date: Apr 2004 Location: Nampa, Idaho Posts: 119	LUV2XCLR8- Yep thats the color...It's been being called "The Green Bean" for a few years now and it just wouldn't be the same if I changed it. Anyhow it only took 30 years but it looks like that color is making a comeback...ie the new VW Bug and a few other new models that I have seen around. I have a pic of the "before" in my profile. I'd post some pics of the after but its currently in way too many pieces strewn around my garage...Hope to get it back together in August. __________________ 1972 K5 CST Last edited by 1972_K5; 07-15-2004 at 07:18 PM.

07-15-2004, 10:35 PM	#47
fast_dev Registered User Join Date: Dec 2000 Location: Ringtown,PA Posts: 555	i think its kinda neat, but only for a drag truck, not on the street. __________________ 68 chevy 406 small block, budget drag racer, new best e.t 11.91 @112 67 nova numbers matching 327 4 speed 13.6 @ 102mph 70 longhorn c-30 402/4 speed 70 c-10 swb 402, muncie 4 speed 94 s-10 350/th350 3:73 posi 71 c-20 402/th400 towrig for racetruck. 72 4wd lifted on 35's 72 350/3 speed winter beater

07-15-2004, 11:57 PM	#48
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	I have mixed emotions about that truck but overall, it has (or had) the potential to be a decent truck. At least unique and one of a kind! As far as chopped tops go, I like them on these trucks but it can't be too drastic! I think that truck has gone a bit too far in the chopped department. I also had the same thought regarding Mad Max or the Road Warrior when I saw pics of the front-end. This truck, on the other hand, has been tastefully chopped at a rake. If I remember correctly, it was something like 2-1/4" up front and 1-3/4" on the rear of the cab. Not sure of the exact chop specs but it was something like that. Attached Images __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

07-16-2004, 12:25 AM	#49
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	"Tastefully chopped"....that is the best way put! i talked with a 1/2 dozen guys on the chop on my longhorn. The best price was on a 8 " chop....around 1200 bones. well,I looked at the truck the dude did(radical, but nice). Told him that the truck was nice....but I was a little on the conservative side. I had to cut it my d@mn self.....3 3/4 at the rear, tipped foward about 1/2". the front pillars were laid back 8-9 degrees......there aint a bit of of fill on the top side of the top .....6 bills later, up to glass front /rear, & about 60 hrs, that squashed top chev was rollin Still dont have the door glass done.....but she is a rod crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

07-16-2004, 01:32 PM	#50
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 489	so that was done on purpose?

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode