|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-19-2021, 07:58 PM
|
#1 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
Re: 73-87 DBW pedal bracket?
Gen5 swap - Ive done 2 different pedals. Stock Gen5 truck/Tahoe pedal and while it doesn't look like stock, it doesn't look bad. I still haven't made a metal bracket, still out of 3/4 MDF.
Other I used a 2008 Impala pedal and modified it to use the stock C10 pedal. The Impala needed to have a little sheet metal plate cut out so the pedal would have the stock c10 tilt, otherwise, it was a lot more vertical if i remember, really awkward. clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
