![]() |
![]() |
#1 |
Registered User
Join Date: Dec 2001
Location: harvard, il. USA
Posts: 397
|
It's been a long time
Been sitting in my barn w/no brakes for 5+ years....
![]() Got laid off so I now have time(smile). Entire brake system to be R&Red. Ordered a bunch from GMCPauls. Still need a bunch of parts I'll prolly buy local...drums, pads, etc. Got it up on jack stands. Noticed the rear pass side leaf spring doesn't look right.... ![]() compared to the drivers side.... ![]() Past life of this truck was out west, camper in the bed, 5th wheel hauler. It has an external tranny cooler under the front bumper.... ![]() Since Im kind of an originality nut, would something like this be a factory option? While Im there...noticed a few ground straps that need cleaning. Yea....mission creep has already started. Thanks much....don t. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2011
Location: Northern Calif.
Posts: 3,816
|
Re: It's been a long time
Good looking truck! The way I drive and my questionable luck, I'd move that trans cooler to higher ground for sure!
![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Nov 2018
Location: Waterford California
Posts: 2,700
|
Re: It's been a long time
That looks like a helper spring was installed on the passenger side.
|
![]() |
![]() |
![]() |
#4 |
Who Changed This?
![]() Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,943
|
Re: It's been a long time
Unless there is a fan installed on that trans cooler, it isn't doing much good. Maybe just put a scoop on it? Mine's tilted into the wind, but a lot of it is up behind the bumper. I'm thinking of adding muffin fans, but since I got the engine cooling under control, I'm going to wait until I pull a long hill before I get too carried away.
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2001
Location: harvard, il. USA
Posts: 397
|
Re: It's been a long time
The trans cooler is leaking. My radiator has a few holes, should be replaced.
I have no plans for the truck to haul much more than plywood. Since the spid ( ![]() Turns out, the pass side leaf spring, near the shackle, one of the leaves is broke. The helper is kinda keeping everything in place. Have fun...don t. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Oct 2015
Location: PNW
Posts: 3,659
|
Re: It's been a long time
That is a nice looking truck. Glad you are getting it set up so you can use and enjoy it. From what you described as far as work the truck might do - once you get a good radiator in with an integral transmission cooler, I would think you could pull the auxiliary cooler off and get rid of the lines. At this point they might be more of a liability of leaks than a benefit.
Last edited by LT7A; 08-03-2021 at 03:07 PM. |
![]() |
![]() |
![]() |
#7 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,469
|
Re: It's been a long time
![]()
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Dec 2018
Location: Los Angeles
Posts: 53
|
Re: It's been a long time
Nice Truck! Congratulations!
Nurse that baby back to daily driver status
__________________
![]() |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2014
Location: Azle,Texas
Posts: 2,248
|
Re: It's been a long time
Good lookin truck!!!
__________________
Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod. |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Dec 2001
Location: harvard, il. USA
Posts: 397
|
Re: It's been a long time
Thanks All.
Will pull the radiator for a recore. Tranny cooler will be removed. New lines need to be ordered. Need to pull the gas tank for a cleaning. Ordering new gas lines as well. Thanks again...don t. Last edited by don t. - 72gmc; 08-05-2021 at 02:54 PM. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|