Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-04-2021, 06:42 PM | #1 |
Registered User
Join Date: Jan 2018
Location: Danville, IL
Posts: 160
|
Track width issues....help needed
Alright guys...I need some serious help...Im totally lost at what's going on here...Long post so stay with me... bought a 66 c10 project that was "started" that i have been working on for a cpl years now....Was starting to mock up body panels and got a set of Slosh Tubz in as well...something is not right with my track width on the front...Here is what i have....I have a Thorebeck Brothers P47 front crossmember, with CPP CP4S4 2.5" drop spindles and Ridetech Strong arm control arms.....I went back and looked up all parts to see what they say about track width...The P47 crossmember says it will narrow the track width 2.25"s and i called Ridetech about the strong arms and they say they do not add or subtract as they are stock width...The spindles say CP4S4 on them which i see are 2.5" drop spindles...1.25" thick rotors are on those and i have US MAG U102 rims which are 20x8 and when i looked them up say they have an offset of 1....I ran a tape measure from inside of tire to inside of tire and measure right at 53"s....Can anyone help me figure this out...Could it be the wrong spindles? wrong rotors? Im lost ....attached are some pics as well...
The more i look at this the more I think that it may be due to the offset on the wheels...Thoughts??? https://photos.app.goo.gl/aay4rXc2HAKqK13C6 https://photos.app.goo.gl/mg2Z7mrV8KQ68Mw66 https://photos.app.goo.gl/J62u1fXcK4muGbmc8 |
08-04-2021, 07:05 PM | #2 |
Moderator
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Track width issues....help needed
Or - Wheel Offset/Backspace?
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
08-04-2021, 07:21 PM | #3 |
Registered User
Join Date: Jan 2018
Location: Danville, IL
Posts: 160
|
Re: Track width issues....help needed
|
08-04-2021, 07:22 PM | #4 |
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: Track width issues....help needed
Take a wheel off and measure the backspacing.
According to US Mags website says it should have a 4.5” backspace
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
08-04-2021, 07:30 PM | #5 |
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: Track width issues....help needed
I would bolt on a fender and see how well the wheel fits before I would worry about the slosh tub.
You’re going to have to modify the fender to lay out anyway.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 08-04-2021 at 07:53 PM. |
08-04-2021, 08:02 PM | #6 |
Registered User
Join Date: Jan 2018
Location: Danville, IL
Posts: 160
|
Re: Track width issues....help needed
Fender fits but no clearance for turning and/or the slosh tubz...If I measure from the frame straight out to the rotor surface I have 14.5" would like to hear what others have if possible..
|
08-04-2021, 10:04 PM | #7 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: Track width issues....help needed
You need something closer to +18 offset (5.25"bs).
Even then, you might want narrowed arms for more turning radius. Keep in mind you don't have the camber where it needs to be either.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
09-19-2021, 08:59 PM | #8 |
Registered User
Join Date: Jan 2018
Location: Danville, IL
Posts: 160
|
Re: Track width issues....help needed
Alright. Still needing some help with this. I ordered and swapped out my spindles with modular spindles. I gained 3/8 on each side. I’m still thinking this isn’t enough. My rims are 20x8 with 4.540 BS. That’s about the max bs I’m going to get isn’t it? Don’t think they offer much if any more on a 20x8, and isn’t a 20x9 with 5.5 the same thing as what I have and won’t change the track width from what I already have? I guess the only other thing left is narrowed arms maybe?? Thoughts??
|
09-19-2021, 11:23 PM | #9 |
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: Track width issues....help needed
Have you trimmed the top edge of the fenders any?
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
09-20-2021, 10:26 AM | #10 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: Track width issues....help needed
Is your clearance @ the body (fender/tub) verified & optimized as 'Lolife' indicated?
Different wheels w/more back-space and/or narrow arms will gain additional clearance. The 'standard' back-space of 4.54" would work on a 5/7 drop but if your plan is to be able to put the frame on the ground the track width needs to be reduced more aggressively.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
12-30-2021, 05:17 PM | #11 |
Registered User
Join Date: Mar 2012
Location: Sonoma CA
Posts: 55
|
Re: Track width issues....help needed
I know this is an old thread, but your CPP spindles space your wheels out an additional 3/4 of an inch on each side. Cpp swears they dont, but I just bought some, and they do. They use the same casting for all their 2.5 drop spindles, the only difference being the size and taper of the ball joint and tie rod holes. 71-72 track width is already wider, so how can the same spindle not increase track width on a pre-71?
Only the modular spindles dont space your wheels out further...that's why they are only 2" drop, the 1/2 less places the ball joint and control arm further up into your wheel. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|