Positive Camber with CPP drop spindles

[SCOTI]

Originally Posted by Duncan K

I had a look at the assembly manual. I am pretty sure the controls arms are on the right sides. Looks like the angled side and the bump stop are to the rear. This is a photo of the passenger side



I stuck an angle gauge on the hub. It is showing 2 degrees. I am surprised it isn't more, it looks ridiculous looking at the wheel



I am going to pull all the shims and see where that gets me.

I was going to say remove any/all shims. Keep them tagged for the location they were pulled w/a pic for reference.