|
Re: Crazy Question (Let Me Know If You Have Tried)
I be leave you can bend the steel side clips but very be careful
and genital with it to take off the plastic cover but do not cleaner on the print under the and do not rub light tap real lower air pressure water moist only. clean the rust steel clips paint or clear coat semi-gloss or sating clear. Then genital put all back you can hand buff the front edges if the rust dep imbedded in the plastic, just take care not to scratch print
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|
10-30-2022, 08:55 AM
Hybrid Mode
