The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-22-2023, 05:05 PM   #1
kglowacky
Registered User
 
Join Date: Mar 2020
Location: The Woodlands,Tx
Posts: 588
blower motor specs

does anyone make a high-performance blower motor for my 78 c-10? I would like a little more airflow coming out of the s/c vents.
kglowacky is offline   Reply With Quote
Old 05-22-2023, 06:23 PM   #2
Loco83
Registered User
 
Loco83's Avatar
 
Join Date: Nov 2018
Location: Cali
Posts: 322
Re: blower motor specs

I replaced my blower motor with one out of a 91 and it puts out some good air.
Loco83 is offline   Reply With Quote
Old 05-25-2023, 08:45 PM   #3
Pontiac1976
Registered User
 
Pontiac1976's Avatar
 
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 766
Re: blower motor specs

Loco83:
Quote:
I replaced my blower motor with one out of a 91 and it puts out some good air.
As said should work.
But you have A/c system then you will not get much improvement, But None A/c system you can buy a A/c motor ( but you want the motor to have a threaded end with a nut or a flat spring nut clip so you can take off the A/c long cage and put on a new None A/c cage ( or your old short cage ) The motor should have steel magnets around the motor housing that the higher output motors.) " Do not buy the cheap molded cage to the shaft of the motor" Because the A/c motor will not fit the none A/c housing.
You can go to 1one of the pick your own part yards GM cars 83-93
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
Pontiac1976 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com